What is the FSCG of the NSN 3110-01-016-2967?

The FSCG of the NSN 3110-01-016-2967 is 3110

Does the NSN 3110-01-016-2967 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-01-016-2967 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-016-2967 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-016-2967 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-016-2967 was assigned to the Federal Catalog?

It was assigned 49 年前, on Sat, Feb 7, 1976

REP5F5-10F | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： REP5F5-10F. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: REP5F5-10F
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-016-2967
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 02/07/1976

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

0.3122 inches minimum and 0.3125 inches maximum bore diameter, 1.8650 inches minimum and 1.8850 inches maximum length from bore center to shank end, self-aligning alignment type, 0.8650 inches minimum and 0.8700 inches maximum inner ring width, contact bearing seal type

數據表

以下是軸承的綜合技術規格： 3110-01-016-2967 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3122 inches minimum and 0.3125 inches maximum
內圈寬度: 0.8650 inches minimum and 0.8700 inches maximum
從孔中心到柄端的長度: 1.8650 inches minimum and 1.8850 inches maximum
潤滑材料文獻及分類: mil-g-81322 mil spec single material response
潤滑材料: grease
外圈寬度: 0.6460 inches minimum and 0.6660 inches maximum
總長度: 2.5000 inches nominal
總外徑: 1.2400 inches minimum and 1.2600 inches maximum
公稱螺紋尺寸: 0.312 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.4280 inches minimum and 0.4480 inches maximum
柄型: internally threaded w/hexagon end
柄螺紋長度: 0.9690 inches minimum and 1.0310 inches maximum
盾牌數量: 2
對邊寬度: 0.4280 inches minimum and 0.4480 inches maximum
樣式指示器: double row, staggered, ball
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response rod end body
Thread 類: 3b
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

替換

The NSN 3110-01-016-2967 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-679-8918	No Name Available	10/01/1995
3110-01-064-1795	No Name Available	10/01/1986

常見問題

快速找到有關軸承的常見問題的答案： REP5F5-10F. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-016-2967?: The FSCG of the NSN 3110-01-016-2967 is 3110

Does the NSN 3110-01-016-2967 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-01-016-2967 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-016-2967 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-016-2967 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.