What is the FSCG of the NSN 3110-01-016-2967?

The FSCG of the NSN 3110-01-016-2967 is 3110

Does the NSN 3110-01-016-2967 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-01-016-2967 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-016-2967 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-016-2967 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-016-2967 was assigned to the Federal Catalog?

It was assigned 49 years ago, on Sat, Feb 7, 1976

REP5F5-10F | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: REP5F5-10F. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: REP5F5-10F
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-01-016-2967
Item Name Code: 00049
Federal Item Identification Guide: A044A0
Assigment Date: 02/07/1976

A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.

1.8650 inches minimum and 1.8850 inches maximum length from bore center to shank end, 0.3122 inches minimum and 0.3125 inches maximum bore diameter, 0.8650 inches minimum and 0.8700 inches maximum inner ring width, contact bearing seal type, self-aligning alignment type

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-01-016-2967 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: self-aligning
Bearing Seal Type: contact
Bore Diameter: 0.3122 inches minimum and 0.3125 inches maximum
Inner Ring Width: 0.8650 inches minimum and 0.8700 inches maximum
Length From Bore Center To Shank End: 1.8650 inches minimum and 1.8850 inches maximum
Lubrication Material Document And Classification: mil-g-81322 mil spec single material response
Lubrication Material: grease
Outer Ring Width: 0.6460 inches minimum and 0.6660 inches maximum
Overall Length: 2.5000 inches nominal
Overall Outside Diameter: 1.2400 inches minimum and 1.2600 inches maximum
Nominal Thread Size: 0.312 inches
Seal Quantity: 2
Self-Alignment Angle: 10.00 degrees nominal
Self-Alignment Location: internal
Shank Diameter: 0.4280 inches minimum and 0.4480 inches maximum
Shank Style: internally threaded w/hexagon end
Shank Thread Length: 0.9690 inches minimum and 1.0310 inches maximum
Shield Quantity: 2
Width Across Flats: 0.4280 inches minimum and 0.4480 inches maximum
Style Designator: double row, staggered, ball
Surface Treatment Document And Classification: qq-p-416,ty 1,cl 2 fed spec single treatment response rod end body
Thread Class: 3b
Thread Direction: right-hand
Thread Quantity Per Inch: 24
Thread Series Designator: unjf

Replaces

The NSN 3110-01-016-2967 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-679-8918	No Name Available	10/01/1995
3110-01-064-1795	No Name Available	10/01/1986

Frequently Asked Questions

Find quick answers to common questions about bearing: REP5F5-10F. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-01-016-2967?: The FSCG of the NSN 3110-01-016-2967 is 3110

Does the NSN 3110-01-016-2967 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-01-016-2967 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-016-2967 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-016-2967 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.