What is the FSCG of the NSN 3120-01-210-1757?

The FSCG of the NSN 3120-01-210-1757 is 3120

Does the NSN 3120-01-210-1757 have a Schedule B code assigned?

Yes, the Schedule B code is 8483308055

Does NSN 3120-01-210-1757 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-210-1757 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-210-1757 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-210-1757 was assigned to the Federal Catalog?

It was assigned 40 年前, on Fri, Jun 7, 1985

KBDE12-250W | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： KBDE12-250W. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: KBDE12-250W
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-01-210-1757
商品名稱代碼: 13209
聯邦物品識別指南: A045A0
分配日期: 06/07/1985

一種可拆卸組件，軸頸、軸頸、樞軸或類似物可在其內或上移動。它用於承載載荷並減少滑動摩擦。它不使用滾動元件。此組件的外部構件經過改造，以提供軸桿。內部構件可以是滑動球面軸承或套筒軸承。不含：滑動球面軸承和自調心滑動軸承。

0.7495 inches minimum and 0.7500 inches maximum bore diameter, 55.0 rockwell c minimum inner member hardness rating, 28.0 rockwell c minimum and 37.0 rockwell c maximum race insert hardness rating, 35.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 3.8650 inches minimum and 3.8850 inches maximum bore center to shank end distance

數據表

以下是軸承的綜合技術規格： 3120-01-210-1757 . 尋找尺寸、材料、公差、性能特徵等。

孔中心至柄端距離: 3.8650 inches minimum and 3.8850 inches maximum
孔徑: 0.7495 inches minimum and 0.7500 inches maximum
硬度等級: 35.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
硬度等級: 55.0 rockwell c minimum inner member
硬度等級: 28.0 rockwell c minimum and 37.0 rockwell c maximum race insert
內構件寬度: 0.9980 inches minimum and 1.0000 inches maximum
潤滑特性: self-lubricating liner race liner
總長度: 4.8750 inches nominal
物料文件及分類: ams 5643 assn std single material response race insert
物料文件及分類: ams 5643 assn std single material response rod end body
物料文件及分類: qq-s-763 fed spec single material response inner member
材料: plastic polytetrafluoroethylene race liner
材料: steel comp 440c inner member
材料: steel comp 630 race insert
材料: steel comp 630 rod end body
外部構件外徑: 1.9900 inches minimum and 2.0100 inches maximum
外部構件寬度: 0.7450 inches minimum and 0.7550 inches maximum
柄螺紋長度: 2.6560 inches minimum and 2.7490 inches maximum
柄型: externally threaded
特殊功能: ms14198 keyway in shank,0.156 in. wide,0.098 in. deep
靜態徑向額定載重: 36510 pounds
樣式指示器: ball type
測試資料文檔: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Thread 類: 3a
螺紋直徑: 0.875 inches nominal
線程方向: right-hand
每英吋螺紋數量: 14
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： KBDE12-250W. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-01-210-1757?: The FSCG of the NSN 3120-01-210-1757 is 3120

Does the NSN 3120-01-210-1757 have a Schedule B code assigned?: Yes, the Schedule B code is 8483308055

Does NSN 3120-01-210-1757 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-210-1757 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-210-1757 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.