What is the FSCG of the NSN 3120-01-026-0877?

The FSCG of the NSN 3120-01-026-0877 is 3120

Does the NSN 3120-01-026-0877 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3120-01-026-0877 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-026-0877 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-026-0877 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-026-0877 was assigned to the Federal Catalog?

It was assigned 48 年前, on Sun, Aug 15, 1976

HM-40425 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： HM-40425. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: HM-40425
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-01-026-0877
商品名稱代碼: 13205
聯邦物品識別指南: A045A0
分配日期: 08/15/1976

管狀物件，帶或不帶凸緣，旨在減少摩擦，並在平行於孔軸線的表面上承載動載荷。必須具有可見或可檢測的潤滑裝置，或可自潤滑。總長度必須超過外徑的25%或本體週邊平面之間的最短距離，但直管狀（無凸緣或肩部）物體除外，其承載面僅平行於孔軸線。包括分成兩段或多段，且承載圓週角不超過180度（3.141弧度）的物件。另請參閱襯套、套筒；墊片、套筒；以及墊圈（經修改）。不含：銷、空心。

2.6200 inches minimum and 2.6220 inches maximum body outside diameter, square left flange body corner corner shape, 2.0620 inches nominal body inside diameter, 2 hole and 2 slot antirotation/lubrication type and quantity, chamfered outside left corner corner shape

數據表

以下是軸承的綜合技術規格： 3120-01-026-0877 . 尋找尺寸、材料、公差、性能特徵等。

防旋轉/潤滑類型和數量: 2 hole and 2 slot
閥體內徑: 2.0620 inches nominal
閥體外徑: 2.6200 inches minimum and 2.6220 inches maximum
角形狀: chamfered outside left corner
角形狀: square left flange body corner
角形狀: square left flange outside right corner
角形狀: square inside left corner
角形狀: square inside right corner
角形狀: square outside right corner
法蘭外徑: 4.0000 inches nominal
孔徑: 0.2500 inches nominal first
內法蘭孔直徑: 1.8750 inches minimum and 1.8760 inches maximum
內法蘭左端至中心線距離: 3.0000 inches nominal
內緣寬度: 3.0000 inches nominal
總長度: 4.8750 inches nominal
物料文件及分類: qq-c-390 fed spec single material response overall
材料: copper alloy 938 overall
槽寬: 0.3120 inches nominal first
槽長: 3.0000 inches nominal first
樣式指示器: solid, plain, no outside flanges, interior flange(s) not located at either end

替換

The NSN 3120-01-026-0877 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3120-00-544-6943	No Name Available	05/01/1986

常見問題

快速找到有關軸承的常見問題的答案： HM-40425. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-01-026-0877?: The FSCG of the NSN 3120-01-026-0877 is 3120

Does the NSN 3120-01-026-0877 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-01-026-0877 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-026-0877 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-026-0877 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.