- 孔徑
- 0.2494 inches minimum and 0.2497 inches maximum
- 孔中心至柄端距離
- 1.8650 inches minimum and 1.8850 inches maximum
- 硬度等級
- 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 硬度等級
- 56.0 rockwell c minimum inner member
- 硬度等級
- 30.0 rockwell c minimum race insert
- 內構件寬度
- 0.5910 inches minimum and 0.5930 inches maximum
- 檢查孔中心至端部距離
- 0.3020 inches minimum and 0.3220 inches maximum
- 總長度
- 2.3575 inches minimum and 2.3900 inches maximum
- 物料文件及分類
- 66 fed std 1st material response or ams 5630 assn std 2nd material response inner member
- 物料文件及分類
- 66 fed std 1st material response or aisi/sae assn std 2nd material response rod end body
- 物料文件及分類
- 66 fed std 1st material response or ams 5643 assn std 2nd material response race insert
- 材料
- plastic tetrafluoroethylene race liner
- 材料
- steel comp 303 or steel comp 630 race insert
- 材料
- steel comp 4140 or steel comp 4340 rod end body
- 材料
- steel comp e52100 or steel comp 440c inner member
- 外部構件外徑
- 0.9850 inches minimum and 1.0100 inches maximum
- 外部構件寬度
- 0.4110 inches minimum and 0.4210 inches maximum
- 柄型
- internally threaded w/inspection hole
- 柄螺紋長度
- 1.0100 inches minimum and 1.1100 inches maximum
- 樣式指示器
- ball type
- 表面處理文件及分類
- qq-p-416,cl 2 fed spec all treatment responses rod end body
- 表面處理
- cadmium or chromate rod end body
- 表面處理
- chromium inner member
- 測試資料文檔
- "97499-ps4075 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Thread 類
- 3b
- 螺紋直徑
- 0.438 inches nominal
- 線程方向
- left-hand
- 每英吋螺紋數量
- 20
- 螺紋系列代號
- unf
