What is the FSCG of the NSN 3120-00-758-9356?

The FSCG of the NSN 3120-00-758-9356 is 3120

Does the NSN 3120-00-758-9356 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3120-00-758-9356 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-758-9356 contain precious materials?

Precious metal content is unknown

Does NSN 3120-00-758-9356 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-758-9356 was assigned to the Federal Catalog?

It was assigned 53 年前, on Wed, Apr 5, 1972

A51G10589-13 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： A51G10589-13. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: A51G10589-13
聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-758-9356
商品名稱代碼: 13205
聯邦物品識別指南: A045A0
分配日期: 04/05/1972

管狀物件，帶或不帶凸緣，旨在減少摩擦，並在平行於孔軸線的表面上承載動載荷。必須具有可見或可檢測的潤滑裝置，或可自潤滑。總長度必須超過外徑的25%或本體週邊平面之間的最短距離，但直管狀（無凸緣或肩部）物體除外，其承載面僅平行於孔軸線。包括分成兩段或多段，且承載圓週角不超過180度（3.141弧度）的物件。另請參閱襯套、套筒；墊片、套筒；以及墊圈（經修改）。不含：銷、空心。

square left flange outside right corner corner shape, square left flange body corner corner shape, chamfered outside left corner corner shape, 1.4930 inches minimum and 1.4950 inches maximum body inside diameter, 1.6895 inches minimum and 1.6905 inches maximum body outside diameter

數據表

以下是軸承的綜合技術規格： 3120-00-758-9356 . 尋找尺寸、材料、公差、性能特徵等。

閥體內徑: 1.4930 inches minimum and 1.4950 inches maximum
閥體外徑: 1.6895 inches minimum and 1.6905 inches maximum
角形狀: chamfered outside left corner
角形狀: square left flange body corner
角形狀: square left flange outside right corner
角形狀: square inside left corner
角形狀: square inside right corner
角形狀: square outside right corner
法蘭外徑: 2.1200 inches minimum and 2.1300 inches maximum
法蘭寬度: 0.1200 inches minimum and 0.1250 inches maximum
潤滑劑調節方式: grooved open both ends
總長度: 0.6450 inches minimum and 0.6560 inches maximum
物料文件及分類: qq-c-390 fed spec single material response overall
材料: copper alloy 955 overall
樣式指示器: solid, external flange one end
表面處理: 125.0 microinches overall
表面凹槽位置和數量: 1 internal
測試資料文檔: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： A51G10589-13. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-758-9356?: The FSCG of the NSN 3120-00-758-9356 is 3120

Does the NSN 3120-00-758-9356 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3120-00-758-9356 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-758-9356 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-758-9356 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.