What is the FSCG of the NSN 3120-00-128-1952?

The FSCG of the NSN 3120-00-128-1952 is 3120

Does the NSN 3120-00-128-1952 have a Schedule B code assigned?

Yes, the Schedule B code is 8483308055

Does NSN 3120-00-128-1952 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-128-1952 contain precious materials?

Precious metal content is unknown

Does NSN 3120-00-128-1952 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-00-128-1952 was assigned to the Federal Catalog?

It was assigned 56 年前, on Wed, Dec 4, 1968

3120-00-128-1952 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3120-00-128-1952. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3120 未安裝的滑動軸承
（NSN）國家庫存編號: 3120-00-128-1952
商品名稱代碼: 13209
聯邦物品識別指南: A045A0
分配日期: 12/04/1968

一種可拆卸組件，軸頸、軸頸、樞軸或類似物可在其內或上移動。它用於承載載荷並減少滑動摩擦。它不使用滾動元件。此組件的外部構件經過改造，以提供軸桿。內部構件可以是滑動球面軸承或套筒軸承。不含：滑動球面軸承和自調心滑動軸承。

56.0 rockwell c minimum inner member hardness rating, 34.0 rockwell c minimum rod end body hardness rating, 2.9900 inches minimum and 3.0100 inches maximum bore center to shank end distance, 0.3745 inches minimum and 0.3750 inches maximum bore diameter, 0.4950 inches minimum and 0.5000 inches maximum inner member width

數據表

以下是軸承的綜合技術規格： 3120-00-128-1952 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.3745 inches minimum and 0.3750 inches maximum
孔中心至柄端距離: 2.9900 inches minimum and 3.0100 inches maximum
硬度等級: 34.0 rockwell c minimum rod end body
硬度等級: 56.0 rockwell c minimum inner member
內構件寬度: 0.4950 inches minimum and 0.5000 inches maximum
總長度: 3.5000 inches nominal
材料: plastic polytetrafluoroethylene race liner
材料: steel comp 440c inner member
材料: steel comp 630 race insert
材料: steel comp 630 rod end body
外部構件外徑: 0.9900 inches minimum and 1.0100 inches maximum
外部構件寬度: 0.4010 inches minimum and 0.4110 inches maximum
柄螺紋長度: 2.2500 inches nominal
柄型: externally threaded
靜態徑向額定載重: 10380 pounds
樣式指示器: ball type
測試資料文檔: "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Thread 類: 3a
螺紋直徑: 0.500 inches nominal
線程方向: right-hand
每英吋螺紋數量: 20
螺紋系列代號: unf

常見問題

快速找到有關軸承的常見問題的答案： 3120-00-128-1952. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3120-00-128-1952?: The FSCG of the NSN 3120-00-128-1952 is 3120

Does the NSN 3120-00-128-1952 have a Schedule B code assigned?: Yes, the Schedule B code is 8483308055

Does NSN 3120-00-128-1952 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-00-128-1952 contain precious materials?: Precious metal content is unknown

Does NSN 3120-00-128-1952 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.