What is the FSCG of the NSN 3110-01-422-8045?

The FSCG of the NSN 3110-01-422-8045 is 3110

Does the NSN 3110-01-422-8045 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-01-422-8045 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-422-8045 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-422-8045 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-422-8045 was assigned to the Federal Catalog?

It was assigned 29 年前, on Fri, Dec 8, 1995

3110-01-422-8045 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3110-01-422-8045. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-422-8045
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 12/08/1995

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.3120 inches minimum and 0.3125 inches maximum bore diameter, self-aligning alignment type, 2.6300 inches minimum and 2.6600 inches maximum length from bore center to shank end, contact bearing seal type, 0.5530 inches minimum and 0.5580 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-01-422-8045 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3120 inches minimum and 0.3125 inches maximum
內圈寬度: 0.5530 inches minimum and 0.5580 inches maximum
從孔中心到柄端的長度: 2.6300 inches minimum and 2.6600 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3250 inches minimum and 0.3400 inches maximum
總長度: 3.3190 inches nominal
材料: plastic polytetrafluoroethylene and glass fiber seal
材料: steel corrosion resisting shield
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
封條數量: 2
自對準定位: internal
柄孔深度: 1.0500 inches maximum
柄孔直徑: 0.3750 inches nominal
柄直徑: 0.4980 inches minimum and 0.5000 inches maximum
柄型: hollow
盾牌數量: 2
特殊功能: reduced internal fit; two lube fittings
樣式指示器: single row, concave rollers
表面處理: cadmium all external/exposed metal surfaces

常見問題

快速找到有關軸承的常見問題的答案： 3110-01-422-8045. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-422-8045?: The FSCG of the NSN 3110-01-422-8045 is 3110

Does the NSN 3110-01-422-8045 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-01-422-8045 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-422-8045 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-422-8045 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.