What is the FSCG of the NSN 3110-01-245-3629?

The FSCG of the NSN 3110-01-245-3629 is 3110

Does the NSN 3110-01-245-3629 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-245-3629 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-245-3629 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-245-3629 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-245-3629 was assigned to the Federal Catalog?

It was assigned 38 年前, on Wed, Nov 26, 1986

538HG-2 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 538HG-2. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 538HG-2
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-245-3629
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 11/26/1986

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

9.0 degrees minimum and 19.0 degrees maximum contact angle, angular load direction, 8.0 millimeters nominal bore diameter, straight bore shape, 8.0 pounds minimum and 12.0 pounds maximum bearing preload rating

數據表

以下是軸承的綜合技術規格： 3110-01-245-3629 . 尋找尺寸、材料、公差、性能特徵等。

軸承預緊額定值: 8.0 pounds minimum and 12.0 pounds maximum
孔徑: 8.0 millimeters nominal
孔形: straight
接觸角: 9.0 degrees minimum and 19.0 degrees maximum
載荷方向: angular
潤滑材料: grease
潤滑材料文獻及分類: beacon 325,cagec 29700 mfr ref single material response
總外徑: 22.0 millimeters nominal
總寬度: 7.0 millimeters nominal
物料文件及分類: mil-p-79,type fbe mil spec single material response retainer
物料文件及分類: qq-s-763 fed spec single material response ball
物料文件及分類: qq-s-763 fed spec single material response inner ring
物料文件及分類: qq-s-763 fed spec single material response outer ring
材料: cotton and plastic phenolic retainer
材料: steel comp 440c ball
材料: steel comp 440c outer ring
材料: steel comp 440c inner ring
保持器的製造方法: machined
標準公差名稱: abec no.7
樣式指示器: counterbored outer ring, non-separable
表面處理: ground
表面處理文件及分類: qq-p-35 fed spec single treatment response ball
表面處理文件及分類: qq-p-35 fed spec single treatment response inner ring
表面處理文件及分類: qq-p-35 fed spec single treatment response outer ring
表面處理: passivate ball
表面處理: passivate inner ring
表面處理: passivate outer ring

常見問題

快速找到有關軸承的常見問題的答案： 538HG-2. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-245-3629?: The FSCG of the NSN 3110-01-245-3629 is 3110

Does the NSN 3110-01-245-3629 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-245-3629 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-245-3629 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-245-3629 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.