What is the FSCG of the NSN 3110-01-218-1566?

The FSCG of the NSN 3110-01-218-1566 is 3110

Does the NSN 3110-01-218-1566 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-01-218-1566 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-218-1566 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-218-1566 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-218-1566 was assigned to the Federal Catalog?

It was assigned 39 年前, on Tue, Oct 8, 1985

3110-01-218-1566 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3110-01-218-1566. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-218-1566
商品名稱代碼: 22293
聯邦物品識別指南: A093A0
分配日期: 10/08/1985

一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。

5.000 inches nominal counterbore diameter, 3.000 inches nominal distance from horizontal centerline to center of lower hole, 2.400 inches nominal aperture diameter, 1.500 inches nominal counterbore depth, 85.0 degrees minimum and 95.0 degrees maximum countersink angle

數據表

以下是軸承的綜合技術規格： 3110-01-218-1566 . 尋找尺寸、材料、公差、性能特徵等。

水平中心線至下孔中心距離: 3.000 inches nominal
孔徑: 2.400 inches nominal
沉孔直徑: 5.000 inches nominal
沉孔深度: 1.500 inches nominal
沉頭孔角度: 85.0 degrees minimum and 95.0 degrees maximum
埋頭孔直徑: 0.400 inches minimum and 0.440 inches maximum
橫斷面形狀樣式: raised surface w/ aperture
寬度方向孔距: 6.000 inches nominal
硬度等級: 70.0 brinell standard minimum and 90.0 brinell standard maximum
內凸面直徑: 3.0570 inches minimum and 3.0585 inches maximum
外徑: 6.750 inches nominal
外凸面直徑: 5.125 inches minimum and 5.126 inches maximum
總厚度: 1.090 inches nominal
物料文件及分類: sae j453,grade 322-t71 assn std single material response overall
材料: aluminum alloy 355.0 overall
較小厚度: 0.140 inches nominal
安裝孔排列方式: vertical centerline
安裝孔類型: round, threaded, countersunk
公稱螺紋尺寸: 0.375 inches
升高表面高度: 0.390 inches minimum and 0.430 inches maximum
特殊功能: reduced od of flange to 2.770 in. r,upper right quadrant; six recessed slots in front face of raised surface; twelve 0.414 in. dia thru holes in flange,unequally spaced on 6.000 in. dia bolt circle
樣式指示器: round
每英吋螺紋數量: 16
螺紋系列代號: unc

常見問題

快速找到有關軸承的常見問題的答案： 3110-01-218-1566. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-218-1566?: The FSCG of the NSN 3110-01-218-1566 is 3110

Does the NSN 3110-01-218-1566 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-01-218-1566 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-218-1566 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-218-1566 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.