What is the FSCG of the NSN 3110-01-212-5246?

The FSCG of the NSN 3110-01-212-5246 is 3110

Does the NSN 3110-01-212-5246 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-01-212-5246 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-212-5246 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-212-5246 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-212-5246 was assigned to the Federal Catalog?

It was assigned 39 年前, on Fri, Jul 12, 1985

SPH5-10B1-501 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SPH5-10B1-501. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SPH5-10B1-501
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-212-5246
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 07/12/1985

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.3120 inches minimum and 0.3125 inches maximum bore diameter, self-aligning alignment type, standard internal fit-up designation, contact bearing seal type, 0.5880 inches minimum and 0.5930 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-01-212-5246 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3120 inches minimum and 0.3125 inches maximum
內圈寬度: 0.5880 inches minimum and 0.5930 inches maximum
內部裝修名稱: standard
從孔中心到柄端的長度: 2.0250 inches minimum and 2.0550 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3250 inches minimum and 0.3400 inches maximum
總長度: 3.3250 inches minimum and 3.4050 inches maximum
總外徑: 1.3000 inches minimum and 1.3500 inches maximum
物料文件及分類: ams 6294 assn std single material response rod end body
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: qq-s-763 fed spec single material response shield
材料: rubber synthetic seal
材料: steel comp 430 shield
材料: steel comp 4620 rod end body
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
封條數量: 1
自對準角: 10.00 degrees nominal
自對準定位: internal
柄孔深度: 1.0000 inches maximum
柄孔直徑: 0.4270 inches minimum and 0.4470 inches maximum
柄直徑: 0.6230 inches minimum and 0.6250 inches maximum
柄型: hollow
盾牌數量: 1
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response overall
表面處理: cadmium overall
測試資料文檔: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： SPH5-10B1-501. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-212-5246?: The FSCG of the NSN 3110-01-212-5246 is 3110

Does the NSN 3110-01-212-5246 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-01-212-5246 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-212-5246 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-212-5246 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.