What is the FSCG of the NSN 3110-01-191-7541?

The FSCG of the NSN 3110-01-191-7541 is 3110

Does the NSN 3110-01-191-7541 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-191-7541 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-191-7541 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-191-7541 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-191-7541 was assigned to the Federal Catalog?

It was assigned 40 年前, on Fri, Oct 12, 1984

901860-2C | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 901860-2C. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 901860-2C
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-191-7541
商品名稱代碼: 30213
聯邦物品識別指南: A044A0
分配日期: 10/12/1984

兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。

4.4997 inches minimum and 4.5000 inches maximum bore diameter, mil-l-6085 mil spec single material response lubrication material document and classification, 20.0 pounds minimum and 30.0 pounds maximum bearing preload rating, 15.0 degrees minimum and 25.0 degrees maximum contact angle, angular load direction

數據表

以下是軸承的綜合技術規格： 3110-01-191-7541 . 尋找尺寸、材料、公差、性能特徵等。

軸承預緊額定值: 20.0 pounds minimum and 30.0 pounds maximum
孔徑: 4.4997 inches minimum and 4.5000 inches maximum
接觸角: 15.0 degrees minimum and 25.0 degrees maximum
載荷方向: angular
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
總外徑: 5.1246 inches minimum and 5.1250 inches maximum
總寬度: 0.6050 inches minimum and 0.6250 inches maximum
物料文件及分類: unable to decode
材料
材料: unable to decode
保持器的製造方法: pressed
盾牌數量: 2
特殊功能: vacuum impregnated retainer with specified oil,centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; 1 shield each bearing
規格/標準數據: 82577-801860 manufacturers standard
標準公差名稱: abec no.5
樣式指示器: counterbored outer rings, non-separable, back to back mounting
表面處理: ground
潤滑材料: unable to decode

替換

The NSN 3110-01-191-7541 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-01-126-9153	No Name Available	05/01/2007

常見問題

快速找到有關軸承的常見問題的答案： 901860-2C. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-191-7541?: The FSCG of the NSN 3110-01-191-7541 is 3110

Does the NSN 3110-01-191-7541 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-191-7541 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-191-7541 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-191-7541 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.