What is the FSCG of the NSN 3110-01-183-4096?

The FSCG of the NSN 3110-01-183-4096 is 3110

Does the NSN 3110-01-183-4096 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-183-4096 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-183-4096 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-183-4096 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-183-4096 was assigned to the Federal Catalog?

It was assigned 40 年前, on Fri, Jul 6, 1984

3TAR-176-184-5 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3TAR-176-184-5. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 3TAR-176-184-5
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-183-4096
商品名稱代碼: 30213
聯邦物品識別指南: A044A0
分配日期: 07/06/1984

兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。

30.0 degrees nominal contact angle, 180.0 pounds minimum and 260.0 pounds maximum bearing preload rating, standard internal fit-up designation, 10.9992 inches minimum and 11.0000 inches maximum bore diameter, angular load direction

數據表

以下是軸承的綜合技術規格： 3110-01-183-4096 . 尋找尺寸、材料、公差、性能特徵等。

軸承預緊額定值: 180.0 pounds minimum and 260.0 pounds maximum
孔徑: 10.9992 inches minimum and 11.0000 inches maximum
接觸角: 30.0 degrees nominal
內部裝修名稱: standard
載荷方向: angular
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
總外徑: 11.4992 inches minimum and 11.5000 inches maximum
總寬度: 0.4850 inches minimum and 0.4900 inches maximum
物料文件及分類: unable to decode
材料
材料: unable to decode
特殊功能: 24 drops of specified lubricant from a no. 26 hypodermic needle
保持器的製造方法: machined
標準公差名稱: abec no.3
樣式指示器: counterbored outer rings, non-separable, back to back mounting
表面處理: ground
表面處理文件及分類: qq-p-35 fed spec single treatment response ball
表面處理文件及分類: qq-p-35 fed spec single treatment response inner ring
表面處理文件及分類: qq-p-35 fed spec single treatment response outer ring
表面處理: passivate ball
表面處理: passivate inner ring
表面處理: passivate outer ring
潤滑材料: unable to decode

常見問題

快速找到有關軸承的常見問題的答案： 3TAR-176-184-5. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-183-4096?: The FSCG of the NSN 3110-01-183-4096 is 3110

Does the NSN 3110-01-183-4096 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-183-4096 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-183-4096 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-183-4096 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.