What is the FSCG of the NSN 3110-01-181-4128?

The FSCG of the NSN 3110-01-181-4128 is 3110

Does the NSN 3110-01-181-4128 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-01-181-4128 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-181-4128 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-181-4128 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-181-4128 was assigned to the Federal Catalog?

It was assigned 41 年前, on Sat, Jun 9, 1984

R3B36C193-2 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： R3B36C193-2. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: R3B36C193-2
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-181-4128
商品名稱代碼: 30213
聯邦物品識別指南: A044A0
分配日期: 06/09/1984

兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。

radial load direction, 0.0017 inches nominal radial internal clearance, g and s section agm65-d end item identification, mil-l-6085 mil spec single material response lubrication material document and classification, 0.1873 inches minimum and 0.1874 inches maximum bore diameter

數據表

以下是軸承的綜合技術規格： 3110-01-181-4128 . 尋找尺寸、材料、公差、性能特徵等。

最終產品識別: g and s section agm65-d
孔徑: 0.1873 inches minimum and 0.1874 inches maximum
內部間隙: 0.0017 inches nominal radial
載荷方向: radial
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
總外徑: 0.4998 inches minimum and 0.5000 inches maximum
總寬度: 0.3074 inches minimum and 0.3124 inches maximum
物料文件及分類: unable to decode
材料: unable to decode
保持器的製造方法: machined
特殊功能: precaution shall be taken to prevent contamination or separation of matched pairs
標準公差名稱: abec no. 7p
樣式指示器: counterbored outer rings, non-separable, face to face mounting
表面處理: ground
潤滑材料: unable to decode

常見問題

快速找到有關軸承的常見問題的答案： R3B36C193-2. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-181-4128?: The FSCG of the NSN 3110-01-181-4128 is 3110

Does the NSN 3110-01-181-4128 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-01-181-4128 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-181-4128 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-181-4128 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.