What is the FSCG of the NSN 3110-01-110-5416?

The FSCG of the NSN 3110-01-110-5416 is 3110

Does the NSN 3110-01-110-5416 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-110-5416 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-110-5416 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-110-5416 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-110-5416 was assigned to the Federal Catalog?

It was assigned 44 年前, on Thu, Apr 2, 1981

34BSX21C0XORAV11G18 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 34BSX21C0XORAV11G18. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 34BSX21C0XORAV11G18
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-110-5416
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 04/02/1981

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

15.0 degrees nominal contact angle, c0x calibration designator, 0.1575 inches nominal bore diameter, straight bore shape, abmk and agyc and test criticality code justification

數據表

以下是軸承的綜合技術規格： 3110-01-110-5416 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.1575 inches nominal
孔形: straight
校準指示器: c0x
接觸角: 15.0 degrees nominal
關鍵性程式碼論證: abmk and agyc and test
內部間隙: 0.0008 inches minimum radial and 0.0016 inches maximum radial
載荷方向: angular
潤滑材料文獻及分類: unitemp 500,fscm 59595 mfr ref single material response
潤滑材料: grease
總外徑: 0.6299 inches nominal
總寬度: 0.2220 inches nominal
物料文件及分類: aisi assn std single material response ball
物料文件及分類: aisi assn std single material response inner ring
物料文件及分類: aisi assn std single material response outer ring
物料文件及分類: aisi assn std single material response shield
材料: plastic phenolic retainer
材料: steel comp 302 shield
材料: steel comp e52100 ball
材料: steel comp e52100 inner ring
材料: steel comp e52100 outer ring
保持器的製造方法: machined
盾牌數量: 1
樣式指示器: shouldered inner ring, separable
表面處理: ground
測試資料文檔: "70854-ora specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). or 70854-v11 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： 34BSX21C0XORAV11G18. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-110-5416?: The FSCG of the NSN 3110-01-110-5416 is 3110

Does the NSN 3110-01-110-5416 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-110-5416 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-110-5416 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-110-5416 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.