What is the FSCG of the NSN 3110-01-107-3661?

The FSCG of the NSN 3110-01-107-3661 is 3110

Does the NSN 3110-01-107-3661 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-01-107-3661 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-107-3661 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-107-3661 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-107-3661 was assigned to the Federal Catalog?

It was assigned 44 年前, on Wed, Feb 4, 1981

SMD4-4A1-501 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SMD4-4A1-501. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SMD4-4A1-501
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-107-3661
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 02/04/1981

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

grease lubrication material, 0.2500 inches minimum and 0.2505 inches maximum bore diameter, 0.4320 inches minimum and 0.4370 inches maximum inner ring width, 1.4220 inches nominal length from bore center to shank end, self-aligning alignment type

數據表

以下是軸承的綜合技術規格： 3110-01-107-3661 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
孔徑: 0.2500 inches minimum and 0.2505 inches maximum
內圈寬度: 0.4320 inches minimum and 0.4370 inches maximum
從孔中心到柄端的長度: 1.4220 inches nominal
潤滑材料: grease
潤滑材料文獻及分類: aero 17,fscm 93508 mfr ref single material response
外圈寬度: 0.3500 inches maximum
總長度: 2.0370 inches nominal
物料文件及分類: mil-s-7393 mil spec single material response shaft
物料文件及分類: mil-s-7420 mil spec single material response inner race
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: qq-s-630 fed spec single material response shield
材料: plastic seal
材料: steel shield
材料: steel comp e3310 shaft
材料: steel comp e52100 inner race
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.250 inches
封條數量: 2
自對準角: 30.00 degrees nominal
自對準定位: internal
柄直徑: 0.2500 inches nominal
柄型: externally threaded
柄螺紋長度: 0.5340 inches nominal
盾牌數量: 2
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,cl 2 fed spec single treatment response overall
表面處理: cadmium overall
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 28
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： SMD4-4A1-501. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-107-3661?: The FSCG of the NSN 3110-01-107-3661 is 3110

Does the NSN 3110-01-107-3661 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-01-107-3661 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-107-3661 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-107-3661 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.