What is the FSCG of the NSN 3110-01-097-4976?

The FSCG of the NSN 3110-01-097-4976 is 3110

Does the NSN 3110-01-097-4976 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-097-4976 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-097-4976 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-097-4976 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-097-4976 was assigned to the Federal Catalog?

It was assigned 44 年前, on Mon, Jul 14, 1980

SR4 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SR4. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SR4
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-097-4976
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 07/14/1980

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

0.0005 inches minimum radial and 0.0008 inches maximum radial internal clearance, 0.2498 inches minimum and 0.2500 inches maximum bore diameter, radial load direction, straight bore shape, mil-b-197 mil spec single material response lubrication material document and classification

數據表

以下是軸承的綜合技術規格： 3110-01-097-4976 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.2498 inches minimum and 0.2500 inches maximum
孔形: straight
內部間隙: 0.0005 inches minimum radial and 0.0008 inches maximum radial
載荷方向: radial
潤滑材料文獻及分類: mil-b-197 mil spec single material response
潤滑材料: lubricant
總外徑: 0.6248 inches minimum and 0.6250 inches maximum
總寬度: 0.1950 inches minimum and 0.1960 inches maximum
物料文件及分類: fed std 66,aisi 410/sae 51410 fed std single material response retainer
物料文件及分類: fed std 66,aisi 440c fed std single material response ball
物料文件及分類: fed std 66,aisi 440c fed std single material response inner ring
物料文件及分類: fed std 66,aisi 440c fed std single material response outer ring
材料: steel comp 440c ball
材料: steel comp 440c outer ring
材料: steel comp 440c inner ring
材料: steel comp 410 retainer
保持器的製造方法: pressed
標準公差名稱: abec no.7
特殊功能: stabilized for operation from m65 deg f to p250 deg f,c56.0 to c64.0 rockwell hardness rings and balls
樣式指示器: non-loading groove, non-separable
表面處理: ground
測試資料文檔: "73030-738034-1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

常見問題

快速找到有關軸承的常見問題的答案： SR4. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-097-4976?: The FSCG of the NSN 3110-01-097-4976 is 3110

Does the NSN 3110-01-097-4976 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-097-4976 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-097-4976 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-097-4976 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.