What is the FSCG of the NSN 3110-01-064-4128?

The FSCG of the NSN 3110-01-064-4128 is 3110

Does the NSN 3110-01-064-4128 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-01-064-4128 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-064-4128 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-064-4128 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-064-4128 was assigned to the Federal Catalog?

It was assigned 46 年前, on Thu, Aug 24, 1978

GB525C4 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： GB525C4. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: GB525C4
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-064-4128
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 08/24/1978

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.4950 inches minimum and 0.5000 inches maximum inner ring width, self-aligning alignment type, contact bearing seal type, 0.2495 inches minimum and 0.2500 inches maximum bore diameter, 1.8250 inches minimum and 1.8550 inches maximum length from bore center to shank end

數據表

以下是軸承的綜合技術規格： 3110-01-064-4128 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2495 inches minimum and 0.2500 inches maximum
內圈寬度: 0.4950 inches minimum and 0.5000 inches maximum
從孔中心到柄端的長度: 1.8250 inches minimum and 1.8550 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3600 inches maximum
總長度: 2.3400 inches minimum and 2.3950 inches maximum
總外徑: 1.0300 inches minimum and 1.0800 inches maximum
物料文件及分類: 66 fed std single material response shield
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: mil-s-7493 mil spec single material response rod end body
材料: rubber butadiene-acrylonitrile class nbr and cotton seal
材料: steel comp 430 shield
材料: steel comp 4620 rod end body
材料: steel snap ring
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.375 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3750 inches nominal
柄型: externally threaded
柄螺紋長度: 1.0000 inches minimum
盾牌數量: 2
特殊功能: two nas 516-1 grease fittings on opposite side of rod end body,radial clearance 0.0002 in. min 0.0010 in. max
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

替換

The NSN 3110-01-064-4128 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-541-0061	No Name Available	08/01/1986

常見問題

快速找到有關軸承的常見問題的答案： GB525C4. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-064-4128?: The FSCG of the NSN 3110-01-064-4128 is 3110

Does the NSN 3110-01-064-4128 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-01-064-4128 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-01-064-4128 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-064-4128 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.