What is the FSCG of the NSN 3110-01-056-1572?

The FSCG of the NSN 3110-01-056-1572 is 3110

Does the NSN 3110-01-056-1572 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-056-1572 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-056-1572 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-056-1572 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-056-1572 was assigned to the Federal Catalog?

It was assigned 47 年前, on Fri, Feb 17, 1978

3110-01-056-1572 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 3110-01-056-1572. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-01-056-1572
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 02/17/1978

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

0.0781 inches nominal bore diameter, 0.2960 inches nominal flange outside diameter, 0.0002 inches minimum radial and 0.0008 inches maximum radial internal clearance, straight bore shape, 0.0310 inches nominal flange width

數據表

以下是軸承的綜合技術規格： 3110-01-056-1572 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.0781 inches nominal
孔形: straight
法蘭外徑: 0.2960 inches nominal
法蘭寬度: 0.0310 inches nominal
內部間隙: 0.0002 inches minimum radial and 0.0008 inches maximum radial
載荷方向: radial
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
潤滑材料: oil
外圈外徑: 0.2500 inches nominal
總寬度: 0.1406 inches nominal
物料文件及分類: 66 fed std single material response retainer
物料文件及分類: 66 fed std single material response shield
物料文件及分類: aisi assn std single material response ball
物料文件及分類: aisi assn std single material response inner ring
物料文件及分類: aisi assn std single material response outer ring
材料: steel comp 440a inner ring
材料: steel comp 440a outer ring
材料: steel comp 440a ball
材料: steel comp 410 retainer
材料: steel comp 410 shield
保持器的製造方法: stamped
盾牌數量: 2
特殊功能: peak starting torque limit is 1500 mg/mm under 75 gm thrust load
標準公差名稱: abec no.5
樣式指示器: non-loading groove, non-separable
表面處理: ground

常見問題

快速找到有關軸承的常見問題的答案： 3110-01-056-1572. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-01-056-1572?: The FSCG of the NSN 3110-01-056-1572 is 3110

Does the NSN 3110-01-056-1572 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-056-1572 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-056-1572 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-056-1572 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.