What is the FSCG of the NSN 3110-00-928-2343?

The FSCG of the NSN 3110-00-928-2343 is 3110

Does the NSN 3110-00-928-2343 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-928-2343 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-928-2343 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-928-2343 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-928-2343 was assigned to the Federal Catalog?

It was assigned 58 年前, on Fri, Aug 26, 1966

S418CHDB1B-704 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： S418CHDB1B-704. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: S418CHDB1B-704
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-928-2343
商品名稱代碼: 30213
聯邦物品識別指南: A044A0
分配日期: 08/26/1966

兩個單列環形球軸承，尺寸經選定，組成匹配對或匹配組。軸承套圈表面經過特殊研磨，達到規定的偏置量，安裝時可產生預定的預緊力。可能包含一個單列角接觸軸承，軸承套圈表面經過特殊研磨，適合雙列安裝。

c calibration designator, 14.0 degrees minimum and 19.0 degrees maximum contact angle, 0.5 pounds minimum and 1.5 pounds maximum bearing preload rating, 0.1250 inches nominal bore diameter, angular load direction

數據表

以下是軸承的綜合技術規格： 3110-00-928-2343 . 尋找尺寸、材料、公差、性能特徵等。

軸承預緊額定值: 0.5 pounds minimum and 1.5 pounds maximum
孔徑: 0.1250 inches nominal
校準指示器: c
接觸角: 14.0 degrees minimum and 19.0 degrees maximum
載荷方向: angular
潤滑材料文獻及分類: mil-l-6085 mil spec single material response
總外徑: 0.2500 inches nominal
總寬度: 0.1774 inches minimum and 0.1874 inches maximum
材料: unable to decode
保持器的製造方法: pressed
盾牌數量: 2
特殊功能: pair of bearings,duplex mounted unshielded sides. max torque 20.000 mg/mm under 75 gm thrust load w/lubricating oil applied. v mark on of bearing assy
標準公差名稱: abec no.7
樣式指示器: counterbored outer rings, non-separable, back to back mounting
表面處理: ground
潤滑材料: unable to decode

常見問題

快速找到有關軸承的常見問題的答案： S418CHDB1B-704. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-928-2343?: The FSCG of the NSN 3110-00-928-2343 is 3110

Does the NSN 3110-00-928-2343 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-928-2343 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-928-2343 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-928-2343 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.