What is the FSCG of the NSN 3110-00-919-3419?

The FSCG of the NSN 3110-00-919-3419 is 3110

Does the NSN 3110-00-919-3419 have a Schedule B code assigned?

Yes, the Schedule B code is 8482200030

Does NSN 3110-00-919-3419 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-919-3419 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-919-3419 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-919-3419 was assigned to the Federal Catalog?

It was assigned 58 年前, on Wed, Aug 10, 1966

L713049L713010-2-437 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： L713049L713010-2-437. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: L713049L713010-2-437
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-919-3419
商品名稱代碼: 00021
聯邦物品識別指南: A044A0
分配日期: 08/10/1966

一種圓柱形裝置，其內錐面或外圈在單排或雙排錐形硬化滾子上轉動，滾子在滾道中滾動順暢，從而最大限度地減少摩擦，設計用於承受徑向載荷和軸向推力。不包括：軸承、滾子、推力。

0.5838 inches minimum and 0.5958 inches maximum cup width, 2.7500 inches minimum and 2.7505 inches maximum bore diameter, 0.0450 inches nominal backface corner radius, 0.0520 inches minimum and 0.0720 inches maximum cone corner radius, 0.7400 inches minimum and 0.7530 inches maximum cone width

數據表

以下是軸承的綜合技術規格： 3110-00-919-3419 . 尋找尺寸、材料、公差、性能特徵等。

背面角半徑: 0.0450 inches nominal
孔徑: 2.7500 inches minimum and 2.7505 inches maximum
錐角半徑: 0.0520 inches minimum and 0.0720 inches maximum
錐體寬度: 0.7400 inches minimum and 0.7530 inches maximum
罩杯寬度: 0.5838 inches minimum and 0.5958 inches maximum
潤滑材料文獻及分類: mil-l-7808 mil spec single material response
潤滑材料: oil
總外徑: 4.0000 inches minimum and 4.0010 inches maximum
總寬度: 0.7420 inches minimum and 0.7580 inches maximum
材料: steel overall
保持器的製造方法: stamped
突出寬度: 0.1462 inches minimum and 0.1742 inches maximum
特殊功能: stabilized for operation m 65 deg to p 300 deg f
樣式指示器: straight bore, normal angle

常見問題

快速找到有關軸承的常見問題的答案： L713049L713010-2-437. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-919-3419?: The FSCG of the NSN 3110-00-919-3419 is 3110

Does the NSN 3110-00-919-3419 have a Schedule B code assigned?: Yes, the Schedule B code is 8482200030

Does NSN 3110-00-919-3419 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-919-3419 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-919-3419 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.