What is the FSCG of the NSN 3110-00-726-6244?

The FSCG of the NSN 3110-00-726-6244 is 3110

Does the NSN 3110-00-726-6244 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-726-6244 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-726-6244 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-726-6244 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-726-6244 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

RA3M5 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： RA3M5. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: RA3M5
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-726-6244
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

1.9280 inches minimum and 1.9480 inches maximum length from bore center to shank end, 0.1895 inches minimum and 0.1900 inches maximum bore diameter, self-aligning alignment type, 0.5570 inches minimum and 0.5620 inches maximum inner ring width, contact bearing seal type

數據表

以下是軸承的綜合技術規格： 3110-00-726-6244 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.1895 inches minimum and 0.1900 inches maximum
內圈寬度: 0.5570 inches minimum and 0.5620 inches maximum
從孔中心到柄端的長度: 1.9280 inches minimum and 1.9480 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.4360 inches nominal
總長度: 2.3435 inches maximum
總外徑: 0.7810 inches nominal
材料: rubber synthetic seal
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel shaft
公稱螺紋尺寸: 0.312 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3125 inches nominal
柄螺紋長度: 1.3650 inches minimum and 1.3850 inches maximum
柄型: externally threaded
特殊功能: 0.0620 in. w by 0.0500 in. deep by 1.3750 in. lg slot in shank
樣式指示器: double row, staggered, ball
表面處理文件及分類: qq-p-416,ty 2,cl 3 fed spec single treatment response exposed surfaces as mounted
表面處理: cadmium exposed surfaces as mounted
測試資料文檔: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unf

替換

The NSN 3110-00-726-6244 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-802-4194	No Name Available	01/01/1960

常見問題

快速找到有關軸承的常見問題的答案： RA3M5. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-726-6244?: The FSCG of the NSN 3110-00-726-6244 is 3110

Does the NSN 3110-00-726-6244 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-726-6244 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-726-6244 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-726-6244 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.