What is the FSCG of the NSN 3110-00-657-2597?

The FSCG of the NSN 3110-00-657-2597 is 3110

Does the NSN 3110-00-657-2597 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-657-2597 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-657-2597 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-657-2597 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-657-2597 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

SM5-7E-501 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SM5-7E-501. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SM5-7E-501
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-657-2597
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

contact bearing seal type, f-104 starfighter acft end item identification, 0.3120 inches minimum and 0.3125 inches maximum bore diameter, self-aligning alignment type, 0.5880 inches minimum and 0.5930 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-00-657-2597 . 尋找尺寸、材料、公差、性能特徵等。

最終產品識別: f-104 starfighter acft
對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3120 inches minimum and 0.3125 inches maximum
內圈寬度: 0.5880 inches minimum and 0.5930 inches maximum
從孔中心到柄端的長度: 2.3050 inches minimum and 2.3350 inches maximum
潤滑材料: grease
潤滑材料文獻及分類: dc44,dow corning corp mfr ref single material response
外圈寬度: 0.3250 inches minimum and 0.3400 inches maximum
總長度: 2.9300 inches minimum and 2.9900 inches maximum
總外徑: 1.3000 inches minimum and 1.3520 inches maximum
材料: steel comp e52100 overall
公稱螺紋尺寸: 0.437 inches
保持器的製造方法: stamped
封條數量: 2
自對準角: 0.10 degrees nominal
自對準定位: internal
柄直徑: 0.4375 inches nominal
柄型: externally threaded
柄螺紋長度: 1.2400 inches minimum and 1.2600 inches maximum
盾牌數量: 2
特殊功能: differentiated by 0.0701 in. hole centered on flat of shank 0.640 in. from center of bore
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416 fed spec single treatment response overall
表面處理: cadmium overall
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 20
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： SM5-7E-501. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-657-2597?: The FSCG of the NSN 3110-00-657-2597 is 3110

Does the NSN 3110-00-657-2597 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-657-2597 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-657-2597 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-657-2597 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.