What is the FSCG of the NSN 3110-00-514-8569?

The FSCG of the NSN 3110-00-514-8569 is 3110

Does the NSN 3110-00-514-8569 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-514-8569 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-514-8569 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-514-8569 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-514-8569 was assigned to the Federal Catalog?

It was assigned 50 年前, on Wed, Aug 7, 1974

MKSP6A TX258 S8 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： MKSP6A TX258 S8. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: MKSP6A TX258 S8
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-514-8569
商品名稱代碼: 00041
聯邦物品識別指南: A044A0
分配日期: 08/07/1974

一種圓柱形部件，其內圈或外圈在成排的硬化滾珠軸承上轉動，滾珠在滾道上滾動，從而最大限度地減少摩擦。此類零件的特徵是耐腐蝕、重量輕、採用英制尺寸而非公制尺寸、內圈通常突出於外圈表面，或內圈寬度極窄，外徑略大於內孔徑。主要用於飛機組件，例如控制系統和飛機表面。不含：環形滾珠軸承。

contact bearing seal type, self-aligning alignment type, radial load direction, 0.3105 inches minimum and 0.3130 inches maximum inner ring width, 0.3747 inches minimum and 0.3750 inches maximum bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-514-8569 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3747 inches minimum and 0.3750 inches maximum
內圈寬度: 0.3105 inches minimum and 0.3130 inches maximum
載荷方向: radial
潤滑材料文獻及分類: mil-g-81322 mil spec single material response
外圈寬度: 0.2450 inches minimum and 0.2500 inches maximum
總外徑: 0.8746 inches minimum and 0.8750 inches maximum
材料: rubber seal
材料: steel comp e52100 ball
材料: steel comp e52100 inner ring
材料: steel comp e52100 outer ring
封條數量: 2
自對準定位: internal
特殊功能: temperature range shall be minus 65 deg f to 330 deg f max,radial and lateral eccentricity 0.0005 in. min to 0.0008 in. max,internal radial clearance 0.0002 in. min to 0.0005 in. max,8 deg self aligning in either direction
樣式指示器: single row self aligning single row inner ring extended both sides
表面處理: cadmium all external/exposed metal surfaces

常見問題

快速找到有關軸承的常見問題的答案： MKSP6A TX258 S8. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-514-8569?: The FSCG of the NSN 3110-00-514-8569 is 3110

Does the NSN 3110-00-514-8569 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-514-8569 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-514-8569 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-514-8569 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.