What is the FSCG of the NSN 3110-00-512-5267?

The FSCG of the NSN 3110-00-512-5267 is 3110

Does the NSN 3110-00-512-5267 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-512-5267 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-512-5267 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-512-5267 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-512-5267 was assigned to the Federal Catalog?

It was assigned 50 年前, on Sat, Aug 3, 1974

SPH4-10D31 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SPH4-10D31. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SPH4-10D31
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-512-5267
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 08/03/1974

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.2495 inches minimum and 0.2500 inches maximum bore diameter, self-aligning alignment type, 0.4950 inches minimum and 0.5000 inches maximum inner ring width, contact bearing seal type, 2.0150 inches minimum and 2.0450 inches maximum length from bore center to shank end

數據表

以下是軸承的綜合技術規格： 3110-00-512-5267 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2495 inches minimum and 0.2500 inches maximum
內圈寬度: 0.4950 inches minimum and 0.5000 inches maximum
從孔中心到柄端的長度: 2.0150 inches minimum and 2.0450 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3450 inches minimum and 0.3600 inches maximum
總長度: 2.5850 inches maximum
總外徑: 1.0300 inches minimum and 1.0800 inches maximum
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: mil-s-7493 mil spec single material response rod end body
物料文件及分類: qq-s-763 fed spec single material response shield
材料: plastic polytetrafluoroethylene seal
材料: steel comp 430 shield
材料: steel comp 4620 rod end body
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄孔深度: 1.0250 inches maximum
柄孔直徑: 0.3860 inches nominal
柄直徑: 0.6230 inches minimum and 0.6250 inches maximum
柄型: hollow
盾牌數量: 2
特殊功能: radial internal clearance 0.0002 in. min to 0.0010 in. max
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
表面處理: cadmium all external/exposed metal surfaces

常見問題

快速找到有關軸承的常見問題的答案： SPH4-10D31. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-512-5267?: The FSCG of the NSN 3110-00-512-5267 is 3110

Does the NSN 3110-00-512-5267 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-512-5267 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-512-5267 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-512-5267 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.