What is the FSCG of the NSN 3110-00-503-5971?

The FSCG of the NSN 3110-00-503-5971 is 3110

Does the NSN 3110-00-503-5971 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-503-5971 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-503-5971 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-503-5971 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-503-5971 was assigned to the Federal Catalog?

It was assigned 50 年前, on Sat, Jul 13, 1974

SM4-6D22 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SM4-6D22. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SM4-6D22
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-503-5971
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 07/13/1974

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

self-aligning alignment type, contact bearing seal type, 1.7350 inches minimum and 1.7650 inches maximum length from bore center to shank end, 0.2495 inches minimum and 0.2500 inches maximum bore diameter, 0.4320 inches minimum and 0.4370 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-00-503-5971 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.2495 inches minimum and 0.2500 inches maximum
內圈寬度: 0.4320 inches minimum and 0.4370 inches maximum
從孔中心到柄端的長度: 1.7350 inches minimum and 1.7650 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3350 inches minimum and 0.3500 inches maximum
總長度: 2.1500 inches nominal
總外徑: 0.7500 inches minimum and 0.8000 inches maximum
物料文件及分類: 66 fed std single material response inner ring
物料文件及分類: 66 fed std single material response roller
物料文件及分類: aisi assn std single material response rod end body
材料: plastic polytetrafluoroethylene and glass seal
材料: steel comp 4620 rod end body
材料: steel corrosion resisting shield
材料: steel snap ring
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.375 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.3750 inches maximum
柄型: externally threaded
柄螺紋長度: 1.1250 inches minimum and 1.1850 inches maximum
盾牌數量: 2
特殊功能: with means for relubrication,keyway in shank
樣式指示器: single row, concave rollers
表面處理文件及分類: qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 24
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： SM4-6D22. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-503-5971?: The FSCG of the NSN 3110-00-503-5971 is 3110

Does the NSN 3110-00-503-5971 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-503-5971 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-503-5971 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-503-5971 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.