What is the FSCG of the NSN 3110-00-409-9849?

The FSCG of the NSN 3110-00-409-9849 is 3110

Does the NSN 3110-00-409-9849 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-409-9849 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-409-9849 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-409-9849 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-409-9849 was assigned to the Federal Catalog?

It was assigned 54 年前, on Fri, Nov 13, 1970

MS21151-3MR3 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： MS21151-3MR3. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: MS21151-3MR3
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-409-9849
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 11/13/1970

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

contact bearing seal type, 1.3750 inches nominal length from bore center to shank end, 0.1897 inches minimum and 0.1900 inches maximum bore diameter, self-aligning alignment type, 0.4320 inches minimum and 0.4370 inches maximum inner ring width

數據表

以下是軸承的綜合技術規格： 3110-00-409-9849 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.1897 inches minimum and 0.1900 inches maximum
內圈寬度: 0.4320 inches minimum and 0.4370 inches maximum
從孔中心到柄端的長度: 1.3750 inches nominal
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.3280 inches nominal
總長度: 1.7655 inches nominal
總外徑: 0.7810 inches nominal
物料文件及分類: mil-s-6758 mil spec 1st material response and mil-s-8690 mil spec 2nd material response and mil-s-7420 mil spec 3rd material response inner ring race
材料: steel comp 4130 or steel comp 8620 or steel comp e52100 inner ring race
公稱螺紋尺寸: 0.190 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.1800 inches minimum and 0.1900 inches maximum
柄型: externally threaded
柄螺紋長度: 0.7190 inches minimum and 0.7810 inches maximum
特殊功能: double row
樣式指示器: double row, staggered, ball
表面處理文件及分類: qq-p-416 fed spec single treatment response all external/exposed metal surfaces
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 32
螺紋系列代號: unf

替換

The NSN 3110-00-409-9849 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-540-4672	No Name Available	09/15/1971

常見問題

快速找到有關軸承的常見問題的答案： MS21151-3MR3. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-409-9849?: The FSCG of the NSN 3110-00-409-9849 is 3110

Does the NSN 3110-00-409-9849 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-409-9849 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-409-9849 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-409-9849 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.