- 對齊類型
- self-aligning
- 軸承密封型
- contact
- 孔徑
- 0.1897 inches minimum and 0.1900 inches maximum
- 內圈寬度
- 0.4320 inches minimum and 0.4370 inches maximum
- 從孔中心到柄端的長度
- 1.3650 inches minimum and 1.3850 inches maximum
- 潤滑材料文獻及分類
- mil-g-81322 mil spec single material response
- 潤滑材料
- grease
- 外圈寬度
- 0.3180 inches minimum and 0.3380 inches maximum
- 總長度
- 1.7655 inches nominal
- 總外徑
- 0.7710 inches minimum and 0.7910 inches maximum
- 物料文件及分類
- ams3652 assn std single material response or ams3666 assn std single material response seal
- 物料文件及分類
- mil-s-6758 mil spec single material response outer ring
- 物料文件及分類
- mil-s-6758 mil spec single material response rod end body
- 物料文件及分類
- mil-s-7420 mil spec single material response inner ring
- 物料文件及分類
- mil-s-7420 mil spec single material response ball
- 材料
- plastic polytetrafluoroethylene seal
- 材料
- steel comp 4130 outer ring
- 材料
- steel comp 4130 rod end body
- 材料
- steel comp e52100 ball
- 材料
- steel comp e52100 inner ring
- 公稱螺紋尺寸
- 0.190 inches
- 封條數量
- 2
- 自對準角
- 10.00 degrees nominal
- 自對準定位
- internal
- 柄直徑
- 0.1900 inches nominal
- 柄型
- externally threaded
- 柄螺紋長度
- 0.7190 inches minimum and 0.7810 inches maximum
- 特殊功能
- stabilized for operation at 250 deg fahrenheit; rockwell hardness c scale 60 to 66 rings and balls; max surface finish raceways an balls 8 microinches aa,shank 63 microinches aa; voids filled 80 pct min with specified lubricant
- 樣式指示器
- double row, staggered, ball
- 表面處理文件及分類
- qq-p-416,ty 1,cl 2 fed spec single treatment response overall
- 表面處理
- cadmium overall
- Thread 類
- 3a
- 線程方向
- left-hand
- 每英吋螺紋數量
- 32
- 螺紋系列代號
- unjf
