- 對齊類型
- self-aligning
- 軸承密封型
- contact
- 孔徑
- 0.2495 inches minimum and 0.2500 inches maximum
- 關鍵性程式碼論證
- supp
- 提供的功能
- aligning ring
- 內圈寬度
- 0.4320 inches minimum and 0.4370 inches maximum
- 從孔中心到柄端的長度
- 1.3650 inches minimum and 1.3950 inches maximum
- 潤滑材料文獻及分類
- mil-g-81322 mil spec single material response
- 潤滑材料
- grease
- 外圈寬度
- 0.3350 inches minimum and 0.3500 inches maximum
- 總長度
- 1.7800 inches nominal
- 總外徑
- 0.8000 inches maximum
- 物料文件及分類
- 66 fed std single material response inner ring
- 物料文件及分類
- 66 fed std single material response roller
- 物料文件及分類
- ams 3652 assn std single material response seal
- 物料文件及分類
- mil-s-6758 mil spec 1st material response or mil-s-8690 mil spec 2nd material response rod end body
- 物料文件及分類
- qq-s-763 fed spec single material response shield
- 材料
- plastic seal
- 材料
- steel comp 430 shield
- 材料
- steel comp 4130 or steel comp 8620 rod end body
- 材料
- steel comp e52100 inner ring
- 材料
- steel comp e52100 roller
- 公稱螺紋尺寸
- 0.250 inches
- 封條數量
- 2
- 自對準角
- 10.00 degrees nominal
- 自對準定位
- internal
- 柄直徑
- 0.2500 inches nominal
- 柄型
- externally threaded
- 柄螺紋長度
- 0.7500 inches minimum and 0.7800 inches maximum
- 盾牌數量
- 2
- 特殊功能
- nas513 keyway in shank and red nylon lubricator fitting
- 樣式指示器
- single row, concave rollers
- 補充功能
- item is not csi but has critical features such as tolerance, heat treatment, surface finish, or material type and special insp. req's such as magnetic
- 表面處理文件及分類
- qq-p-416,ty 1,cl 2 fed spec single treatment response exposed surfaces as mounted
- 表面處理
- cadmium exposed surfaces as mounted
- Thread 類
- 3a
- 線程方向
- right-hand
- 每英吋螺紋數量
- 28
- 螺紋系列代號
- unjf
