- 對齊類型
- self-aligning
- 軸承密封型
- contact
- 孔徑
- 0.2497 inches minimum and 0.2500 inches maximum
- 內圈寬度
- 0.5880 inches minimum and 0.5930 inches maximum
- 從孔中心到柄端的長度
- 1.4590 inches minimum and 1.4790 inches maximum
- 潤滑材料文獻及分類
- mil-g-81322 mil spec single material response
- 潤滑材料
- grease
- 外圈寬度
- 0.4280 inches minimum and 0.4480 inches maximum
- 總長度
- 1.9180 inches minimum and 1.9580 inches maximum
- 總外徑
- 0.9280 inches minimum and 0.9480 inches maximum
- 物料文件及分類
- ams 3652 assn std single material response or ams 3666 assn std single material response seal
- 物料文件及分類
- mil-s-6758 mil spec single material response outer ring
- 物料文件及分類
- mil-s-6758 mil spec single material response shaft
- 物料文件及分類
- mil-s-7420 mil spec single material response inner ring
- 物料文件及分類
- mil-s-7420 mil spec single material response ball
- 材料
- plastic polytetrafluoroethylene seal
- 材料
- steel comp 4130 outer ring
- 材料
- steel comp 4130 shaft
- 材料
- steel comp e52100 ball
- 材料
- steel comp e52100 inner ring
- 公稱螺紋尺寸
- 0.312 inches
- 封條數量
- 2
- 自對準角
- 10.00 degrees nominal
- 自對準定位
- internal
- 柄直徑
- 0.4280 inches minimum and 0.4480 inches maximum
- 柄型
- internally threaded w/hexagon end
- 柄螺紋長度
- 0.7190 inches minimum and 0.7810 inches maximum
- 對邊寬度
- 0.4280 inches minimum and 0.4480 inches maximum
- 樣式指示器
- double row, staggered, ball
- 表面處理文件及分類
- qq-p-416,ty 1,cl 2 fed spec single treatment response rod end body
- 表面處理文件及分類
- qq-p-416,ty 1,cl,2 fed spec single treatment response outer ring
- 表面處理
- cadmium outer ring
- 表面處理
- cadmium rod end body
- Thread 類
- 3b
- 線程方向
- right-hand
- 每英吋螺紋數量
- 24
- 螺紋系列代號
- unjf
