What is the FSCG of the NSN 3110-00-198-2926?

The FSCG of the NSN 3110-00-198-2926 is 3110

Does the NSN 3110-00-198-2926 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-198-2926 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-2926 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-198-2926 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-198-2926 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

AMS1KDD | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： AMS1KDD. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: AMS1KDD
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-198-2926
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

straight bore shape, standard internal fit-up designation, mil-g-23827 mil spec single material response lubrication material document and classification, radial load direction, 0.2500 inches nominal bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-198-2926 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.2500 inches nominal
孔形: straight
內部裝修名稱: standard
載荷方向: radial
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
總外徑: 0.7500 inches nominal
總寬度: 0.2812 inches nominal
材料: steel corrosion resisting overall
保持器的製造方法: pressed
盾牌數量: 2
特殊功能: pressed stainless steel retainer heat treat parts per mil-h-6875;immediately after quenching, refrigerate parts at minus 120 to minus 90 deg f for 2 hours;followed by tempering at a minimum temp of plus 325 deg f for 3 hours;repeat refrigeration and tempering steps at least once; final hardness should be rockwell c-58 min; ff-b-171 applies except for bearing type and dimensions; all other attributes of this bearing are i/a/w ff-b-171 qap eq003 applies source inspection required
標準公差名稱: abec no.3
樣式指示器: non-loading groove, non-separable
表面處理: ground

替換

The NSN 3110-00-198-2926 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-175-1108	No Name Available	08/01/1986
3110-00-198-0132	No Name Available	06/01/1976
3110-00-220-5300	No Name Available	07/01/1997
3110-00-227-3175	No Name Available	06/01/1976
3110-00-277-0091	No Name Available	04/01/1984
3110-00-293-9345	No Name Available	06/01/1976
3110-00-328-6174	No Name Available	03/01/1995
3110-00-492-0478	No Name Available	10/01/1989
3110-00-529-0572	No Name Available	06/01/1976
3110-00-555-5548	No Name Available	08/01/1992
3110-00-561-1826	No Name Available	09/18/1970
3110-00-618-9692	No Name Available	06/01/1976
3130-00-623-4003	No Name Available	01/01/1963
3110-00-624-3484	No Name Available	04/01/1984
3110-00-727-1243	No Name Available	12/30/1971

常見問題

快速找到有關軸承的常見問題的答案： AMS1KDD. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-198-2926?: The FSCG of the NSN 3110-00-198-2926 is 3110

Does the NSN 3110-00-198-2926 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-198-2926 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-2926 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-198-2926 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.