What is the FSCG of the NSN 3110-00-198-2270?

The FSCG of the NSN 3110-00-198-2270 is 3110

Does the NSN 3110-00-198-2270 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-198-2270 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-2270 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-198-2270 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-198-2270 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

SM5-8C-1 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SM5-8C-1. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SM5-8C-1
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-198-2270
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

contact bearing seal type, self-aligning alignment type, 0.6870 inches nominal inner ring width, 2.3750 inches nominal length from bore center to shank end, 0.3125 inches nominal bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-198-2270 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3125 inches nominal
內圈寬度: 0.6870 inches nominal
從孔中心到柄端的長度: 2.3750 inches nominal
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.4580 inches nominal
總長度: 3.1090 inches nominal
總外徑: 1.4060 inches nominal
材料: rubber synthetic seal
材料: steel inner ring
材料: steel outer ring
材料: steel roller
材料: steel shaft
公稱螺紋尺寸: 0.500 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.5000 inches nominal
柄螺紋長度: 1.3750 inches nominal
柄型: externally threaded
特殊功能: radial clearance 0.0001 in. to 0.0005 in. measured under 5 lb load
樣式指示器: single row, concave rollers
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 20
螺紋系列代號: unjf

常見問題

快速找到有關軸承的常見問題的答案： SM5-8C-1. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-198-2270?: The FSCG of the NSN 3110-00-198-2270 is 3110

Does the NSN 3110-00-198-2270 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-198-2270 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-2270 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-198-2270 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.