What is the FSCG of the NSN 3110-00-198-0252?

The FSCG of the NSN 3110-00-198-0252 is 3110

Does the NSN 3110-00-198-0252 have a Schedule B code assigned?

Yes, the Schedule B code is 8482500000

Does NSN 3110-00-198-0252 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-0252 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-198-0252 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-198-0252 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

SM5-8C | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SM5-8C. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SM5-8C
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-198-0252
商品名稱代碼: 00050
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種特殊的單列或多列滾子軸承，剛性或自調心，並採用內螺紋、空心、梅花螺紋或實心軸構造。

0.3120 inches minimum and 0.3125 inches maximum bore diameter, 0.6820 inches minimum and 0.6870 inches maximum inner ring width, contact bearing seal type, 2.3950 inches minimum and 2.4250 inches maximum length from bore center to shank end, self-aligning alignment type

數據表

以下是軸承的綜合技術規格： 3110-00-198-0252 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3120 inches minimum and 0.3125 inches maximum
內圈寬度: 0.6820 inches minimum and 0.6870 inches maximum
從孔中心到柄端的長度: 2.3950 inches minimum and 2.4250 inches maximum
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
外圈寬度: 0.4450 inches minimum and 0.4600 inches maximum
總長度: 3.1070 inches nominal
總外徑: 1.3600 inches minimum and 1.4100 inches maximum
物料文件及分類: mil-s-7420 mil spec single material response inner ring
物料文件及分類: mil-s-7420 mil spec single material response roller
物料文件及分類: mil-s-7493 mil spec single material response rod end body
物料文件及分類: qq-s-763 fed spec single material response shield
材料: rubber butadiene-acrylonitrile class nbr seal
材料: steel comp 430 shield
材料: steel comp 4620 rod end body
材料: steel snap ring
材料: steel comp e52100 inner ring
材料: steel comp e52100 roller
公稱螺紋尺寸: 0.500 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.5000 inches nominal
柄型: externally threaded
柄螺紋長度: 1.3400 inches nominal
盾牌數量: 2
特殊功能: grease fitting located on lower half 45 deg from horizontal center line
樣式指示器: single row, concave rollers
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 20
螺紋系列代號: unjf

替換

The NSN 3110-00-198-0252 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3120-00-444-6007	No Name Available	09/18/1970

常見問題

快速找到有關軸承的常見問題的答案： SM5-8C. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-198-0252?: The FSCG of the NSN 3110-00-198-0252 is 3110

Does the NSN 3110-00-198-0252 have a Schedule B code assigned?: Yes, the Schedule B code is 8482500000

Does NSN 3110-00-198-0252 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-198-0252 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-198-0252 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.