What is the FSCG of the NSN 3110-00-179-7580?

The FSCG of the NSN 3110-00-179-7580 is 3110

Does the NSN 3110-00-179-7580 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-179-7580 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7580 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-179-7580 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-179-7580 was assigned to the Federal Catalog?

It was assigned 56 年前, on Fri, Jun 6, 1969

SFR2-5PPK24-54 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： SFR2-5PPK24-54. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: SFR2-5PPK24-54
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-179-7580
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 06/06/1969

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

0.3590 inches nominal flange outside diameter, straight bore shape, 0.0002 inches minimum radial and 0.0004 inches maximum radial internal clearance, 0.0310 inches nominal flange width, 0.1250 inches nominal bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-179-7580 . 尋找尺寸、材料、公差、性能特徵等。

孔徑: 0.1250 inches nominal
孔形: straight
法蘭外徑: 0.3590 inches nominal
法蘭寬度: 0.0310 inches nominal
內部間隙: 0.0002 inches minimum radial and 0.0004 inches maximum radial
載荷方向: radial
潤滑材料: oil
潤滑材料文獻及分類: f50,fscm 24446 mfr ref single material response
外圈外徑: 0.3125 inches nominal
總寬度: 0.1406 inches nominal
物料文件及分類: aisi assn std single material response ball
物料文件及分類: aisi assn std single material response inner ring
物料文件及分類: aisi assn std single material response outer ring
材料: steel comp 440a inner ring
材料: steel comp 440a outer ring
材料: steel comp 440a ball
材料: steel corrosion resisting retainer
材料: steel corrosion resisting shield
保持器的製造方法: pressed
盾牌數量: 2
標準公差名稱: abec no.7
樣式指示器: non-loading groove, non-separable
表面處理: ground

替換

The NSN 3110-00-179-7580 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-269-4711	No Name Available	01/01/1984

常見問題

快速找到有關軸承的常見問題的答案： SFR2-5PPK24-54. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-179-7580?: The FSCG of the NSN 3110-00-179-7580 is 3110

Does the NSN 3110-00-179-7580 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-179-7580 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7580 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-179-7580 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.