What is the FSCG of the NSN 3110-00-084-3467?

The FSCG of the NSN 3110-00-084-3467 is 3110

Does the NSN 3110-00-084-3467 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-084-3467 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-084-3467 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-084-3467 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-084-3467 was assigned to the Federal Catalog?

It was assigned 57 年前, on Sun, Dec 24, 1967

A539FFT5CR0YC021 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： A539FFT5CR0YC021. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: A539FFT5CR0YC021
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-084-3467
商品名稱代碼: 00014
聯邦物品識別指南: A044A0
分配日期: 12/24/1967

一種圓柱形裝置，其內圈或外圈繞單排或雙排硬化滾珠轉動，滾珠在兩圈之間滾動順暢，從而最大限度地減少摩擦。對於表面經過特殊研磨以用於雙聯安裝的軸承，請參閱“雙聯滾珠軸承”。不含：機架滾珠軸承。

contact bearing seal type, straight bore shape, 0.0005 inches minimum radial and 0.0008 inches maximum radial internal clearance, radial load direction, 0.7497 inches minimum and 0.7500 inches maximum bore diameter

數據表

以下是軸承的綜合技術規格： 3110-00-084-3467 . 尋找尺寸、材料、公差、性能特徵等。

軸承密封型: contact
孔徑: 0.7497 inches minimum and 0.7500 inches maximum
孔形: straight
內部間隙: 0.0005 inches minimum radial and 0.0008 inches maximum radial
載荷方向: radial
潤滑材料文獻及分類: mil-g-23827 mil spec single material response
潤滑材料: grease
總外徑: 1.1871 inches minimum and 1.1875 inches maximum
總寬度: 0.2802 inches minimum and 0.2812 inches maximum
材料: rubber synthetic retainer
材料: steel corrosion resisting ball
材料: steel corrosion resisting inner ring
材料: steel corrosion resisting outer ring
保持器的製造方法: machined
封條數量: 2
特殊功能: 0.0002 in. inner and outer ring radial runout,bearing prepacked w/80 cm porm 10 pctof specified grease,bore calibration plas 0.0000 in. minus 0.00015 in.,of vslibration plus 0.0000 in. minus 0.0002 in. selected item drawing
樣式指示器: non-loading groove, non-separable
表面處理: ground

常見問題

快速找到有關軸承的常見問題的答案： A539FFT5CR0YC021. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-084-3467?: The FSCG of the NSN 3110-00-084-3467 is 3110

Does the NSN 3110-00-084-3467 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-084-3467 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-084-3467 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-084-3467 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.