What is the FSCG of the NSN 3110-00-079-9960?

The FSCG of the NSN 3110-00-079-9960 is 3110

Does the NSN 3110-00-079-9960 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-079-9960 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-079-9960 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-079-9960 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-079-9960 was assigned to the Federal Catalog?

It was assigned 57 年前, on Wed, Dec 13, 1967

AS21151C | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： AS21151C. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: AS21151C
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-079-9960
商品名稱代碼: 00049
聯邦物品識別指南: A044A0
分配日期: 12/13/1967

一種特殊的單列或多列滾珠軸承，剛性或自調心，採用實心或空心軸構造，具有內部或外部螺紋。

self-aligning alignment type, 2.4380 inches nominal length from bore center to shank end, 0.3122 inches minimum and 0.3125 inches maximum bore diameter, 0.8700 inches nominal inner ring width, contact bearing seal type

數據表

以下是軸承的綜合技術規格： 3110-00-079-9960 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: self-aligning
軸承密封型: contact
孔徑: 0.3122 inches minimum and 0.3125 inches maximum
內圈寬度: 0.8700 inches nominal
從孔中心到柄端的長度: 2.4380 inches nominal
潤滑材料文獻及分類: mil-prf-81322 mil spec single material response
潤滑材料: grease
外圈寬度: 0.6500 inches nominal
總長度: 3.0630 inches nominal
總外徑: 1.2400 inches minimum and 1.2510 inches maximum
材料: rubber synthetic seal
材料: steel ball
材料: steel inner ring
材料: steel outer ring
材料: steel shaft
公稱螺紋尺寸: 0.438 inches
封條數量: 2
自對準角: 10.00 degrees nominal
自對準定位: internal
柄直徑: 0.4375 inches nominal
柄螺紋長度: 1.5630 inches nominal
柄型: externally threaded
特殊功能: 0.0004 in. max radial clearance
樣式指示器: double row, staggered, ball
表面處理: cadmium all external/exposed metal surfaces
Thread 類: 3a
線程方向: right-hand
每英吋螺紋數量: 20
螺紋系列代號: unf

替換

The NSN 3110-00-079-9960 is used in place of the following discontinued or alternate items:

NSN	姓名	日期
3110-00-173-5067	No Name Available	12/01/1971
3110-00-516-5315	No Name Available	12/22/1971
3110-00-702-7796	No Name Available	06/01/2004

常見問題

快速找到有關軸承的常見問題的答案： AS21151C. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-079-9960?: The FSCG of the NSN 3110-00-079-9960 is 3110

Does the NSN 3110-00-079-9960 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-079-9960 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-079-9960 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-079-9960 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.