What is the FSCG of the NSN 3110-00-076-8801?

The FSCG of the NSN 3110-00-076-8801 is 3110

Does the NSN 3110-00-076-8801 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3110-00-076-8801 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-076-8801 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-076-8801 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-076-8801 was assigned to the Federal Catalog?

It was assigned 62 年前, on Tue, Jan 1, 1963

38650-1 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 38650-1. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 38650-1
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-076-8801
商品名稱代碼: 00019
聯邦物品識別指南: A044A0
分配日期: 01/01/1963

一種帶有滾珠滾動體的減摩軸承，用於抵抗軸向推力或支撐軸向負荷。不含：軸承、滾珠、樞軸。

rigid alignment type, 0.1248 inches minimum and 0.1250 inches maximum bore smallest diameter, 0.1270 inches minimum and 0.1290 inches maximum largest bore diameter, 0.1855 inches minimum and 0.1875 inches maximum overall height, 0.4373 inches minimum and 0.4375 inches maximum largest outside diameter

數據表

以下是軸承的綜合技術規格： 3110-00-076-8801 . 尋找尺寸、材料、公差、性能特徵等。

對齊類型: rigid
孔最小直徑: 0.1248 inches minimum and 0.1250 inches maximum
最大孔徑: 0.1270 inches minimum and 0.1290 inches maximum
最大外徑: 0.4373 inches minimum and 0.4375 inches maximum
總高度: 0.1855 inches minimum and 0.1875 inches maximum
物料文件及分類: 552673,73030 mfr ref single material response retainer
物料文件及分類: fed-std-66 fed std single material response inner ring
物料文件及分類: fed-std-66 fed std single material response ball
物料文件及分類: fed-std-66 fed std single material response outer ring
材料: steel ball
材料: steel corrosion resisting retainer
材料: steel inner ring
材料: steel outer ring
保持器的製造方法: machined
最小外徑: 0.4335 inches minimum and 0.4355 inches maximum
特殊功能: stabilized for operation from m 65 deg f to p 200 deg f,c58.0 to c62.0 rockwell hardness rings,c58.0 to c64.0 ball
樣式指示器: grooved race surface, banded od
表面處理: ground
推力方向能力指定: single

常見問題

快速找到有關軸承的常見問題的答案： 38650-1. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-076-8801?: The FSCG of the NSN 3110-00-076-8801 is 3110

Does the NSN 3110-00-076-8801 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3110-00-076-8801 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-076-8801 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-076-8801 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.