What is the FSCG of the NSN 3110-00-076-1411?

The FSCG of the NSN 3110-00-076-1411 is 3110

Does the NSN 3110-00-076-1411 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-00-076-1411 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-076-1411 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-076-1411 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-076-1411 was assigned to the Federal Catalog?

It was assigned 57 年前, on Sat, Jul 29, 1967

11687110 | Aerospace-Bearing

概括

探索軸承的詳細摘要資訊： 11687110. 包括 NSN、分類組和識別碼，以支援採購、合規性和準確的零件追蹤。

零件編號: 11687110
聯邦供應分類: 3110 未安裝的減摩軸承
（NSN）國家庫存編號: 3110-00-076-1411
商品名稱代碼: 22293
聯邦物品識別指南: A093A0
分配日期: 07/29/1967

一種相對扁平的剛性部件，帶或不帶中心孔，用於將環形軸承或套筒軸承固定在合適的外殼中。必須附有用於安裝的鑽孔和/或螺紋孔。不含：端蓋、電動旋轉設備。

0.324 inches nominal counterbore depth, 0.861 inches nominal distance from vertical centerline to center of right hole, 1.265 inches minimum and 1.280 inches maximum aperture diameter, 0.861 inches nominal distance from horizontal centerline to center of right hole, 1090-00-134-3071 end item identification

數據表

以下是軸承的綜合技術規格： 3110-00-076-1411 . 尋找尺寸、材料、公差、性能特徵等。

水平中心線至右孔中心的距離: 0.861 inches nominal
垂直中心線至右孔中心的距離: 0.861 inches nominal
最終產品識別: 1090-00-134-3071
孔徑: 1.265 inches minimum and 1.280 inches maximum
沉孔深度: 0.324 inches nominal
沉孔直徑: 0.324 inches nominal
橫斷面形狀樣式: raised surface w/ aperture
孔距: 1.722 inches nominal
寬度方向孔距: 1.722 inches nominal
對邊長度: 2.420 inches nominal
外徑: 2.840 inches minimum and 2.900 inches maximum
外凸面直徑: 1.720 inches minimum and 1.780 inches maximum
總厚度: 0.273 inches minimum and 0.289 inches maximum
物料文件及分類: qq-a-225/6 fed spec single material response overall
材料: aluminum alloy overall
安裝孔排列方式: four holes
安裝孔直徑: 0.206 inches minimum and 0.212 inches maximum
安裝孔類型: round, unthreaded, counterbored
升高表面高度: 0.094 inches nominal
對邊寬度: 2.420 inches nominal
樣式指示器: four flats
表面處理: anodize overall

常見問題

快速找到有關軸承的常見問題的答案： 11687110. 探索技術規格、安裝技巧、維護指南、監管要求和故障排除建議。

What is the FSCG of the NSN 3110-00-076-1411?: The FSCG of the NSN 3110-00-076-1411 is 3110

Does the NSN 3110-00-076-1411 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-00-076-1411 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-076-1411 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-076-1411 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.