- 對齊類型
- self-aligning
- 軸承密封型
- contact
- 孔徑
- 0.2495 inches minimum and 0.2500 inches maximum
- 內圈寬度
- 0.5880 inches minimum and 0.5930 inches maximum
- 從孔中心到柄端的長度
- 1.8650 inches minimum and 1.8850 inches maximum
- 潤滑材料文獻及分類
- mil-g-23827 mil spec single material response
- 潤滑材料
- grease
- 外圈寬度
- 0.4280 inches minimum and 0.4480 inches maximum
- 總長度
- 2.3290 inches minimum and 2.3590 inches maximum
- 總外徑
- 0.9280 inches minimum and 0.9480 inches maximum
- 物料文件及分類
- 66 fed std single material response ball
- 物料文件及分類
- 66 fed std single material response inner ring
- 物料文件及分類
- 66 fed std single material response outer ring
- 物料文件及分類
- 66 fed std single material response rod end body
- 材料
- plastic seal
- 材料
- steel comp e51100 ball
- 材料
- steel comp e51100 inner ring
- 材料
- steel comp e51100 outer ring
- 材料
- steel comp e51100 rod end body
- 公稱螺紋尺寸
- 0.375 inches
- 封條數量
- 2
- 自對準角
- 10.00 degrees nominal
- 自對準定位
- internal
- 柄直徑
- 0.3750 inches nominal
- 柄型
- externally threaded
- 柄螺紋長度
- 1.1250 inches nominal
- 特殊功能
- one slot in lg of thd,0.093 in. min,0.098 in. max,0.306 in. min,0.311 in. max,from bottom of thd
- 樣式指示器
- double row, staggered, ball
- 表面處理文件及分類
- qq-p-416. ty 2 fed spec single treatment response exposed surfaces as mounted
- 表面處理
- cadmium exposed surfaces as mounted
- 測試資料文檔
- "76301-mac p.s. 21201 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Thread 類
- 2a
- 線程方向
- right-hand
- 每英吋螺紋數量
- 24
- 螺紋系列代號
- unf
