What is the FSCG of the NSN 3120-01-707-2184?

The FSCG of the NSN 3120-01-707-2184 is 3120

Does the NSN 3120-01-707-2184 have a Schedule B code assigned?

Yes, the Schedule B code is 8482300040

Does NSN 3120-01-707-2184 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-707-2184 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-707-2184 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-707-2184 was assigned to the Federal Catalog?

It was assigned 2년 전, on Mon, Jan 23, 2023

AS14101 REV E | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. AS14101 REV E. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: AS14101 REV E
연방 공급 분류: 3120 미장착 플레인 베어링
(NSN) 국가 재고 번호: 3120-01-707-2184
품목 이름 코드: 13208
연방 품목 식별 가이드: A045A0
배정 날짜: 01/23/2023

저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.

28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member hardness rating, 0.873 inches minimum and 0.875 inches maximum inner member width, 0.8745 inches minimum and 0.8750 inches maximum bore diameter, self-lubricating liner race liner lubrication feature, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-707-2184 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 0.8745 inches minimum and 0.8750 inches maximum
경도 등급: 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
경도 등급: 28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member
내부 멤버 너비: 0.873 inches minimum and 0.875 inches maximum
윤활 기능: self-lubricating liner race liner
통제 기관에서 할당한 부품 이름: bearing, plain, self-lubricating, self-aligning, low speed, narrow, grooved race, - 65 to + 325 f
재료 문서 및 분류: ams5630 international std/spec all material responses or ams5880 international std/spec all material responses or ams5618 international std/spec all material responses inner member
재료 문서 및 분류: ams5643 international std/spec all material responses outer race member
재료: plastic polytetrafluoroethylene race liner
재료: steel comp 440c inner member
재료: steel corrosion resisting outer race member
외부 멤버 외부 직경: 1.5620 inches minimum and 1.5625 inches maximum
외부 멤버 너비: 0.698 inches minimum and 0.708 inches maximum
특별 기능: absence of letter c indicates 440c ball material. absence of letter a = tested to 25000 cycles. p = zinc-nickel or cadmium plating. material - ball: 440c (ams5630, ams5880, or ams5618). race: 17-4ph cres per ams5643. liner: ptfe shall be included in the liner. harness rating is before swaging. finish: race: plating, when specified, shall be zinc-nickel plating per ams2417, type 2, grade b or cadmium plating per ams-qq-p-416, type ii, class 2. plating shall be on the outside diameter surface and on the flats between the outside diameter and the v-grooves. the plating runout shall occur either in the v-grooves or on the side face areas between the v-grooves and the ball. ball: passivate per ams2700, method 1 (nitric acid) or method 2 (citric acid), or astm a967. citric 1, citric 2, and citric 3 are acceptable. (ams2700, method 1, type 8 is prohibited on bearings manufactured with 440c after june 1, 2018).
정적 반경 하중 정격: 62200 pounds
스타일 지정자: with insert and/or liner with staking groove
표면 처리 문서 및 분류: ams2417, type 2, grade b international std/spec all treatment responses or ams-qq-p-416, type ii, class 2 international std/spec all treatment responses inner member
표면 처리 문서 및 분류: ams2700, method 1 (nitric acid) or method 2 (citric acid) international std/spec all treatment responses or astm a967. citric 1, citric 2, and citric 3 international std/spec all treatment responses outer race member
표면 처리: cadmium or zinc and nickel alloy inner member
표면 처리: passivate outer race member

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. AS14101 REV E. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3120-01-707-2184?: The FSCG of the NSN 3120-01-707-2184 is 3120

Does the NSN 3120-01-707-2184 have a Schedule B code assigned?: Yes, the Schedule B code is 8482300040

Does NSN 3120-01-707-2184 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-707-2184 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-707-2184 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.