- 보어 직경
- 0.1895 inches minimum and 0.1915 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 1.5520 inches minimum and 1.5720 inches maximum
- 제공되는 기능
- external lubrication fitting
- 경도 등급
- 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 57.0 rockwell c minimum and 61.0 rockwell c maximum inner member
- 내부 멤버 너비
- 0.4320 inches minimum and 0.4370 inches maximum
- 윤활 기능
- groove inner member
- 전체 길이
- 1.9525 inches nominal
- 재료 문서 및 분류
- ams 7440 assn std 1st material response or mil-s-7420 mil spec 1st material response or qq-s-763 fed spec 2nd material response or ams 5630 assn std 2nd material response inner member
- 재료 문서 및 분류
- mil-g-23827 mil spec single material response lubrication
- 재료 문서 및 분류
- mil-s-6758 mil spec 1st material response or ams 6370 assn std 1st material response or mil-s-5000 mil spec 2nd material response or ams 6415 assn std 2nd material response or astm a108 assn std 3rd material response or ams 5069 assn std 3rd material response rod end body
- 재료 문서 및 분류
- qq-c-465 fed spec 1st material response or qq-c-465 fed spec 2nd material response or qq-c-465 fed spec 3rd material response or qq-b-637 fed spec 4th material response or qq-b-637 fed spec 5th material response race insert
- 재료
- copper alloy 606 or copper alloy 630 or copper alloy 614 or copper alloy 462 or copper alloy 464 or copper alloy 482 or copper alloy 485 race insert
- 재료
- grease lubrication
- 재료
- steel comp 4130 or steel comp e4340 or steel comp 1018 rod end body
- 재료
- steel comp e52100 or steel comp 440c inner member
- 외부 멤버 외부 직경
- 0.7710 inches minimum and 0.7910 inches maximum
- 외부 멤버 너비
- 0.3320 inches minimum and 0.3420 inches maximum
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 0.9688 inches minimum and 1.0625 inches maximum
- 사양/표준 데이터
- 26512-gb525ab manufacturers specification control
- 정적 반경 하중 정격
- 4500 pounds
- 특별 기능
- race insert,6th and 7th material responses per qq-b-637; plating on external surfaces of race insert and body only; no plating on bore of ball; optional lubricant reservoir thru shank length
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-c-320 fed spec single treatment response inner member
- 표면 처리 문서 및 분류
- qq-p-416,type1,class 2 fed spec single treatment response race insert
- 표면 처리 문서 및 분류
- qq-p-416,type1,class 2 fed spec single treatment response rod end body
- 표면 처리
- cadmium race insert
- 표면 처리
- cadmium rod end body
- 표면 처리
- chromium inner member
- 테스트 데이터 문서
- "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.312 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unf
