ATW10-4D

포괄적인 명세 및 신청 세부사항: ATW10-4D Self-Aligning Plain Bearing.

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. ATW10-4D. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호
ATW10-4D
연방 공급 분류
3120 미장착 플레인 베어링
(NSN) 국가 재고 번호
3120-00-110-8541
품목 이름 코드
13208
연방 품목 식별 가이드
A045A0
배정 날짜
08/12/1968

저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.

114cs124-1,77272 mfr ref single material response race liner material document and classification, 58.0 rockwell c nominal inner member hardness rating, 0.6245 inches minimum and 0.6250 inches maximum bore diameter, 32.0 rockwell c nominal outer race member hardness rating, 0.6230 inches minimum and 0.6250 inches maximum inner member width

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-110-8541 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경
0.6245 inches minimum and 0.6250 inches maximum
경도 등급
32.0 rockwell c nominal outer race member
경도 등급
58.0 rockwell c nominal inner member
내부 멤버 너비
0.6230 inches minimum and 0.6250 inches maximum
재료 문서 및 분류
114cs124-1,77272 mfr ref single material response race liner
재료 문서 및 분류
ams 5630 mil std single material response inner member
재료 문서 및 분류
ams 5643 mil std single material response outer race member
재료
plastic tetrafluoroethylene race liner
재료
steel inner member
재료
steel outer race member
외부 멤버 외부 직경
1.1870 inches minimum and 1.1875 inches maximum
외부 멤버 너비
0.4950 inches minimum and 0.5000 inches maximum
정적 반경 하중 정격
27000 pounds
스타일 지정자
with insert and/or liner
테스트 데이터 문서
"77272-5307 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 77272-5424 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. ATW10-4D. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3120-00-110-8541?
The FSCG of the NSN 3120-00-110-8541 is 3120
Does the NSN 3120-00-110-8541 have a Schedule B code assigned?
Yes, the Schedule B code is 8482300040
Does NSN 3120-00-110-8541 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-110-8541 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-00-110-8541 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-110-8541 was assigned to the Federal Catalog?
It was assigned 56년 전, on Mon, Aug 12, 1968

가격 및 재고

베어링의 가격 및 재고 정보를 알아보려면 양식을 작성하세요. ATW10-4D

인기 베어링

수요가 많고 성능이 뛰어난 베어링을 살펴보세요.

P000001505
3110-00-555-5238
Annular Ball Bearing
P000001520
3110-00-144-8519
Annular Ball Bearing
P000001526
3110-00-554-5653
Annular Ball Bearing
P000004879
3110-00-144-9004
Annular Ball Bearing
P000004880
3110-00-555-5216
Annular Ball Bearing
P000004903
3110-00-554-5311
Annular Ball Bearing
P000119
3110-01-495-3403
Journal Roller Bearing
P000121106
3110-00-554-5403
Annular Ball Bearing
P000121805
3110-00-144-8519
Annular Ball Bearing
P000122
3110-01-495-3404
Annular Ball Bearing
P000277
3130-00-151-9669
Roller Bearing Unit
P0002844-103 SH 2 FN 6
3120-01-660-5251
Sleeve Bearing
P0002844-105 SH 5 FN 11
3120-01-660-5903
Thrust Washer Bearing
P0002844-105 SH 5 FN 7
3120-01-660-5561
Sleeve Bushing
P0002844-105 SH 7 FN 18
3120-01-660-5263
Sleeve Bushing