What is the FSCG of the NSN 3110-01-525-6843?

The FSCG of the NSN 3110-01-525-6843 is 3110

Does the NSN 3110-01-525-6843 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-525-6843 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-525-6843 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-525-6843 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-525-6843 was assigned to the Federal Catalog?

It was assigned 20년 전, on Fri, Nov 19, 2004

SAA17UF0 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. SAA17UF0. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: SAA17UF0
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-01-525-6843
품목 이름 코드: 00014
연방 품목 식별 가이드: A044A0
배정 날짜: 11/19/2004

내륜 또는 외륜이 단일 또는 이중 열의 경화 볼 위에서 회전하는 원통형 장치로, 두 링 사이를 쉽게 굴러 마찰을 최소화합니다. 양면 장착을 위해 특수 연삭된 면이 있는 품목은 베어링, 볼, 양면을 참조하십시오. 제외: 베어링, 볼, 기체.

30.00 degrees nominal contact angle, 1.7000 inches nominal bore diameter, bearing end item identification, 2.1245 inches minimum and 2.1250 inches maximum overall outside diameter, 1.8700 inches minimum and 1.8750 inches maximum overall width

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-525-6843 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

최종 품목 식별: bearing
보어 직경: 1.7000 inches nominal
접촉각: 30.00 degrees nominal
전체 외경: 2.1245 inches minimum and 2.1250 inches maximum
전체 너비: 1.8700 inches minimum and 1.8750 inches maximum
재료 문서 및 분류: aisi 440c stainless steel assn std single material response overall
재료: steel overall
특별 기능: "this bearing has no ball separator/spacers. means load balls are in direct contact w/ each other. during rotation, ball-to-ball friction is significant, lubrication properties are critical. bearing is best suited to intermittent or oscillatory rotation, thus max speed value is not provided; inner and outer race have axial runout 0.00050 max. fim; apprx. 64 balls, dia. 0.094 nom, 440c stainless steel; id min 1.7494" max 1.7500"; inner ring off set, dimensions are outer dia 2.024", inner dia 1.890"; through harded and dimensionally stabilized for use from -65f to +250f"
스타일 지정자: loading groove, non-separable

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. SAA17UF0. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-525-6843?: The FSCG of the NSN 3110-01-525-6843 is 3110

Does the NSN 3110-01-525-6843 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-525-6843 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-525-6843 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-525-6843 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.