What is the FSCG of the NSN 3110-00-978-7521?

The FSCG of the NSN 3110-00-978-7521 is 3110

Does the NSN 3110-00-978-7521 have a Schedule B code assigned?

Yes, the Schedule B code is 8482997090

Does NSN 3110-00-978-7521 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-978-7521 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-978-7521 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-978-7521 was assigned to the Federal Catalog?

It was assigned 58년 전, on Mon, Oct 10, 1966

6435-20153-103 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 6435-20153-103. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: 6435-20153-103
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-978-7521
품목 이름 코드: 22293
연방 품목 식별 가이드: A093A0
배정 날짜: 10/10/1966

비교적 평평하고 단단한 제품으로, 중앙에 구멍이 있거나 없는 제품으로, 링 베어링이나 슬리브 베어링을 고정하는 데 적합합니다. 장착을 위해 드릴 및/또는 나사 구멍이 있어야 합니다. 단, 엔드 벨, 전기 회전 장비는 제외합니다.

39.0 rockwell c minimum and 43.0 rockwell c maximum hardness rating, 1.503 inches minimum and 1.520 inches maximum length, 0.318 inches nominal corner radius, 0.874 inches minimum and 0.877 inches maximum distance between holes along length, 2 bolt circle hole quantity

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-978-7521 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

볼트 원 구멍 수량: 2
모서리 반경: 0.318 inches nominal
길이를 따라 구멍 사이의 거리: 0.874 inches minimum and 0.877 inches maximum
경도 등급: 39.0 rockwell c minimum and 43.0 rockwell c maximum
길이: 1.503 inches minimum and 1.520 inches maximum
전체 두께: 0.185 inches minimum and 0.186 inches maximum
재료: steel comp e4340 overall
장착 구멍 배열 스타일: horizontal centerline
장착 구멍 직경: 0.203 inches nominal
장착 구멍 유형: round, unthreaded
특별 기능: one central tang 0.602 in.nom lg by 0.250 in.w extending one side w/0.310 in.corner radius;holes countersunk 82 deg to 0.390 in.min,0.400 in.max dia;shape:special
너비: 1.228 inches minimum and 1.248 inches maximum
표면 처리: oxide overall
테스트 데이터 문서: "81349-mili6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 6435-20153-103. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-978-7521?: The FSCG of the NSN 3110-00-978-7521 is 3110

Does the NSN 3110-00-978-7521 have a Schedule B code assigned?: Yes, the Schedule B code is 8482997090

Does NSN 3110-00-978-7521 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-978-7521 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-978-7521 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.