What is the FSCG of the NSN 3110-00-876-2412?

The FSCG of the NSN 3110-00-876-2412 is 3110

Does the NSN 3110-00-876-2412 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-876-2412 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-876-2412 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-876-2412 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-876-2412 was assigned to the Federal Catalog?

It was assigned 63년 전, on Mon, Jan 1, 1962

204-040-345-7 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 204-040-345-7. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: 204-040-345-7
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-876-2412
품목 이름 코드: 30213
연방 품목 식별 가이드: A044A0
배정 날짜: 01/01/1962

치수적으로 선택된 두 개의 단열 환형 볼 베어링이 한 쌍 또는 세트로 구성됩니다. 링 면은 특정 오프셋으로 특수 연삭되어 장착 시 미리 정해진 예압을 생성합니다. 이중 장착을 위해 특수 연삭된 면을 가진 단열 앵귤러 콘택트 베어링이 포함될 수 있습니다.

170.0 millimeters nominal overall outside diameter, angular load direction, 44.0 millimeters nominal overall width, 0.0003 inches nominal axial and 0.0045 inches minimum radial and 0.0055 inches maximum radial internal clearance, 120.0 millimeters nominal bore diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-876-2412 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 120.0 millimeters nominal
내부 여유 공간: 0.0003 inches nominal axial and 0.0045 inches minimum radial and 0.0055 inches maximum radial
하중 방향: angular
전체 외경: 170.0 millimeters nominal
전체 너비: 44.0 millimeters nominal
재료 문서 및 분류: unable to decode
재료: unable to decode
리테이너 제작 방법: machined
특별 기능: bearings marked w/same serial no.,bearings stabilized for operation from m 65 to p 300 deg f
표준 허용 오차 지정: abec no.5
스타일 지정자: counterbored outer rings, non-separable, back to back mounting
표면 마감: ground
테스트 데이터 문서: "21335-aps33 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps36 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 38443-aqcp-2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 38443-aqc+9-a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47168a3 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47163a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 204-040-345-7. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-876-2412?: The FSCG of the NSN 3110-00-876-2412 is 3110

Does the NSN 3110-00-876-2412 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-876-2412 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-876-2412 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-876-2412 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.