What is the FSCG of the NSN 3110-00-179-7299?

The FSCG of the NSN 3110-00-179-7299 is 3110

Does the NSN 3110-00-179-7299 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7299 require demilitarization?

"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-00-179-7299 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-179-7299 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-179-7299 was assigned to the Federal Catalog?

It was assigned 56년 전, on Wed, Feb 19, 1969

3110-00-179-7299 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-179-7299. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-179-7299
품목 이름 코드: 30214
연방 품목 식별 가이드: A044A0
배정 날짜: 02/19/1969

두 개 이상의 베어링을 이중 장착에 맞춰 조립한 다중 조립체입니다. 주로 항공기 프로펠러 및 회전익 항공기 로터 블레이드용으로 설계되었습니다. 베어링, 볼, 환형 베어링도 참조하십시오.

fed std-66, fed std single material response outer ring material document and classification, 2.4503 inches minimum and 2.4803 inches maximum overall width, astm-b-147,81346 assn std single material response retainer material document and classification, 2.1651 inches minimum and 2.1654 inches maximum bore diameter, 3.9367 inches minimum and 3.9370 inches maximum overall outside diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-179-7299 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 2.1651 inches minimum and 2.1654 inches maximum
전체 외경: 3.9367 inches minimum and 3.9370 inches maximum
전체 너비: 2.4503 inches minimum and 2.4803 inches maximum
재료 문서 및 분류: astm-b-147,81346 assn std single material response retainer
재료 문서 및 분류: fed std-66, fed std single material response outer ring
재료 문서 및 분류: fed-std-66, fed std single material response ball
재료 문서 및 분류: fed-std-66, fed std single material response inner ring
재료: copper alloy 864 retainer
재료: steel comp e52100 ball
재료: steel comp e52100 inner ring
재료: steel comp e52100 outer ring
스택 배열: 3 angular contact bearings,2 tandem mtd,1 reversed
특별 기능: stabilized for operation from m65 deg f to p300 deg f,assy relationship marking (v) on od of bearing elements,same ser no. permanently marked on all bearing elements
스타일 지정자: stack
테스트 데이터 문서: "21335-aps-33 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps-36a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 38443-aes-1a05 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 38443-aes-10a9 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-179-7299. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-179-7299?: The FSCG of the NSN 3110-00-179-7299 is 3110

Does the NSN 3110-00-179-7299 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7299 require demilitarization?: "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Does NSN 3110-00-179-7299 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-179-7299 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.