What is the FSCG of the NSN 3110-00-172-7088?

The FSCG of the NSN 3110-00-172-7088 is 3110

Does the NSN 3110-00-172-7088 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3110-00-172-7088 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-172-7088 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-172-7088 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-172-7088 was assigned to the Federal Catalog?

It was assigned 53년 전, on Fri, Nov 26, 1971

T100 1-2 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. T100 1-2. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: T100 1-2
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-172-7088
품목 이름 코드: 00019
연방 품목 식별 가이드: A044A0
배정 날짜: 11/26/1971

축 방향 추력에 저항하거나 축 방향 하중을 지지하도록 설계된 볼 구름 요소를 갖는 감마 베어링. 베어링, 볼, 피벗은 제외됩니다.

steel comp e52100 overall material, 0.3750 inches nominal overall height, 0.5000 inches nominal bore smallest diameter, 1.1875 inches nominal overall outside diameter, rigid alignment type

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-172-7088 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

정렬 유형: rigid
보어 최소 직경: 0.5000 inches nominal
전체 높이: 0.3750 inches nominal
전체 외경: 1.1875 inches nominal
재료: steel comp e52100 overall
특별 테스트 기능: special quality control testing
표준 허용 오차 지정: afbma std tolerance for thrust bearings
스타일 지정자: 4 point ball contact
표면 마감: ground
테스트 데이터 문서: "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
추력 방향 기능 지정: single

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. T100 1-2. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-172-7088?: The FSCG of the NSN 3110-00-172-7088 is 3110

Does the NSN 3110-00-172-7088 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3110-00-172-7088 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-172-7088 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-172-7088 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.