What is the FSCG of the NSN 3110-00-135-9142?

The FSCG of the NSN 3110-00-135-9142 is 3110

Does the NSN 3110-00-135-9142 have a Schedule B code assigned?

Yes, the Schedule B code is 8482800080

Does NSN 3110-00-135-9142 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-135-9142 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-135-9142 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-135-9142 was assigned to the Federal Catalog?

It was assigned 56년 전, on Wed, Jan 15, 1969

SJ7315-9DF | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. SJ7315-9DF. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: SJ7315-9DF
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-135-9142
품목 이름 코드: 00017
연방 품목 식별 가이드: A044A0
배정 날짜: 01/15/1969

샤프트 또는 회전부가 일반적으로 케이지에 들어있는 경화 롤러 위에서 회전하는 품목입니다. 내륜이나 외륜, 또는 둘 다를 포함해야 합니다. 레이스가 없는 품목은 리테이너 및 롤러 베어링을 참조하십시오.

1.6900 inches minimum and 1.7100 inches maximum inner ring width, 2.3119 inches minimum and 2.3125 inches maximum overall outside diameter, 1.2450 inches minimum and 1.2500 inches maximum outer ring width, 1.4995 inches minimum and 1.5000 inches maximum bore diameter, fed-std-66 fed std single material response inner ring material document and classification

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-135-9142 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 1.4995 inches minimum and 1.5000 inches maximum
내부 링 너비: 1.6900 inches minimum and 1.7100 inches maximum
외부 링 너비: 1.2450 inches minimum and 1.2500 inches maximum
전체 외경: 2.3119 inches minimum and 2.3125 inches maximum
재료 문서 및 분류: fed-std-66 fed std single material response inner ring
재료 문서 및 분류: fed-std-66 fed std single material response outer ring
재료 문서 및 분류: fed-std-66 fed std single material response retainer
재료 문서 및 분류: fed-std-66 fed std single material response roller
재료: steel inner ring
재료: steel outer ring
재료: steel retainer
재료: steel roller
스타일 지정자: split outer race, solid inner race
테스트 데이터 문서: "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. SJ7315-9DF. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-135-9142?: The FSCG of the NSN 3110-00-135-9142 is 3110

Does the NSN 3110-00-135-9142 have a Schedule B code assigned?: Yes, the Schedule B code is 8482800080

Does NSN 3110-00-135-9142 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-135-9142 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-135-9142 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.