What is the FSCG of the NSN 3120-01-357-8118?

The FSCG of the NSN 3120-01-357-8118 is 3120

Does the NSN 3120-01-357-8118 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3120-01-357-8118 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-357-8118 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-357-8118 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-357-8118 was assigned to the Federal Catalog?

It was assigned 33 years ago, on Fri, May 1, 1992

6408788 PART 211057726 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 6408788 PART 211057726. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 6408788 PART 211057726
Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-357-8118
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 05/01/1992

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.8750 inches nominal diameter, round center hole shape style, rectangular cross-sectional shape style, 1.5150 inches nominal outside diameter, square all corners corner shape

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-357-8118 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Shape Style: round
Corner Shape: square all corners
Cross-Sectional Shape Style: rectangular
Diameter: 0.8750 inches nominal
Outside Diameter: 1.5150 inches nominal
Overall Thickness: 0.0630 inches nominal
Material Document And Classification: delrin,cagec 53711 mfr ref single material response overall
Material: plastic acetal overall
Style Designator: round

Frequently Asked Questions

Find quick answers to common questions about bearing: 6408788 PART 211057726. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-357-8118?: The FSCG of the NSN 3120-01-357-8118 is 3120

Does the NSN 3120-01-357-8118 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-357-8118 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-357-8118 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-357-8118 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.