What is the FSCG of the NSN 3120-01-194-8538?

The FSCG of the NSN 3120-01-194-8538 is 3120

Does the NSN 3120-01-194-8538 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3120-01-194-8538 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-194-8538 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-194-8538 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-194-8538 was assigned to the Federal Catalog?

It was assigned 40 years ago, on Mon, Nov 19, 1984

3120-01-194-8538 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 3120-01-194-8538. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Federal Supply Classification: 3120 Unmounted Plain Bearings
(NSN) National Stock Number: 3120-01-194-8538
Item Name Code: 13211
Federal Item Identification Guide: A045A0
Assigment Date: 11/19/1984

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.2490 inches minimum and 0.2510 inches maximum center hole keyway width, chamfered outside right corner corner shape, round w/keyway center hole shape style, 0.0910 inches minimum and 0.1010 inches maximum center hole keyway depth, 1 center hole keyway quantity

Datasheet

Below are the comprehensive technical specifications for bearing: 3120-01-194-8538 . Find dimensions, materials, tolerances, performance characteristics, etc.

Center Hole Keyway Depth: 0.0910 inches minimum and 0.1010 inches maximum
Center Hole Keyway Quantity: 1
Center Hole Keyway Width: 0.2490 inches minimum and 0.2510 inches maximum
Center Hole Shape Style: round w/keyway
Corner Shape: chamfered outside right corner
Corner Shape: square outside left corner
Corner Shape: square inside left corner
Corner Shape: square inside right corner
Cross-Sectional Shape Style: rectangular
Diameter: 2.6875 inches nominal
Outside Diameter: 2.6875 inches nominal
Overall Thickness: 0.5625 inches nominal
Material Document And Classification: mil-s-890,cl bs mil spec single material response overall
Material: steel overall
Style Designator: round
Surface Finish: 16.0 microinches left side

Frequently Asked Questions

Find quick answers to common questions about bearing: 3120-01-194-8538. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3120-01-194-8538?: The FSCG of the NSN 3120-01-194-8538 is 3120

Does the NSN 3120-01-194-8538 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3120-01-194-8538 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-194-8538 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-194-8538 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.